Epson 2450 Product Information Guide - Page 5

Selecting TWAIN Settings If you need to manually adjust the settings in EPSON TWAIN, follow the guidelines shown at right. The illustration shows the preferred order in which settings should be adjusted. Detailed descriptions are given in the electronic Reference Guide. 1 Select basic settings: Document Source Image Type Destination Resolution The most important thing to remember when scanning is to select the correct image type and resolution for your scan. 2 Preview your image EPSON Perfection 2450 PHOTO 3 Automatically set the scan area for your image using Auto Locate 4 Size or scale the image 5 Customize your exposure and use color management 6 Scan the image into your application 7 Close EPSON TWAIN Indicator Light The indicator light (next to the ] Start button) indicates the status of the scanner, as described below. Light On Flashing Flashing Off Color Status Green The scanner is ready to scan images. Green The scanner is initializing (warming up) or is busy scanning. Red Check the following, then turn your scanner off and back on to reset it: ❏ Make sure the transportation lock is turned to the unlocked position. See the Start Here sheet for details. ❏ Make sure the scanner is properly connected to your computer. ❏ If you are scanning transparencies, make sure you've removed the reflective document mat. If this does not eliminate the error, the fluorescent lamp may need to be replaced or the scanner may have another problem. Consult your dealer or EPSON. - The scanner is unplugged or turned off. Related Documentation CPD-12888 CPD-12887 CPD-12889 - - TM-PERF2450 PL-PERF2450 EPSON Perfection 2450 PHOTO Start Here poster EPSON Perfection 2450 PHOTO Scanner Basics EPSON Perfection 2450 PHOTO scanner software CD-ROM Reference Guide (HTML) EPSON Smart Panel User's Manual (HTML) EPSON Perfection 2450 PHOTO Service Manual EPSON Perfection 2450 PHOTO Parts List 9/01 EPSON Perfection 2450 PHOTO - 5