Epson 30000 Product Information Guide - Page 6

EPSON GT-30000 If you are scanning multiple pages using the ADF, you do not need to Preview the document unless you want to scan only a portion of a document. Preview button Marquee button Auto Locate button Auto Exposure button 5. Choose your scan settings. Click the Auto Locate button to automatically define the scan area around the edges of your image. You can also adjust the scan area by positioning the mouse pointer over the dotted line around the marquee's edge and dragging the box to resize the marquee. Click the Auto Exposure button to automatically set the highlight and shadow exposures. Generally it's a good idea to use the Auto Exposure button to obtain the best settings for your scan. See your electronic EPSON GT-30000 Reference Guide for more information about choosing settings. If you need to remove color cast from your image, use the Gray Balance Intensity feature. 6. When you've finished making adjustments, click the Scan button. The READY light on the front of the scanner flashes while it's scanning. In a few moments, a scanned image is imported into your host application's window. (If the READY light continues to blink, it may indicate an error condition. See page 4 for more information.) 7. Click Close to close the EPSON TWAIN HS or EPSON TWAIN HS Network window and return to your application. 8. If you want, save your image using the Save or Save As options from the File menu of your host application. Using a Network Scanner Network scanning involves the following steps: ❏ Two or more computers must be connected on the same network segment running TCP/IP protocol. ❏ The scanner server must be turned on and running EPSON Scan Server. ❏ From the client computer, start EPSON TWAIN HS Network to establish a connection to the scanner server. Only one client computer at a time can connect to the scanner server. (See "Starting EPSON TWAIN HS Network" on page 7 for instructions.) ❏ Choose your settings, and then place your document on the scanner or in the automatic document feeder. ❏ Start the scan. Although this can be done from EPSON TWAIN HS Network on the client computer, it may be more convenient to press the scanner's Start button or to start the scan from the scanner server. A progress meter appears on both the scanner server and client computer as the image is pre-scanned, then scanned. ❏ If you want to scan more than one image, place your second image on the document table and press the scanner's Start button again. Repeat this step for every image you want to scan. (The settings you chose for the first image apply to these images too.) The Start button is only available when you use EPSON TWAIN HS to access a scanner connected to your computer and you are running Windows Me, Windows 2000, or Windows 98. If you are running Windows 95 or Windows NT, the Start button is disabled. ❏ When you return to the client computer, your scanned images appear in the host application's window. Close EPSON TWAIN HS Network to end your connection to the scanner server and allow other client computers to use the scanner. When you press the Start button, some applications automatically close the client computer's connection to the scanner server when the scan is finished. You can't use the Start button to scan multiple images if you're using these applications. 6 - EPSON GT-30000 3/01