Epson 3170 Product Information Guide - Page 5

EPSON Perfection 3170 EPSON Scan Color Restoration is available in Home and Professional Modes. 1. To select Color Restoration, start EPSON Scan. You see a screen similar to this. 3. Follow the instructions for the type of film you are scanning: If you are scanning 35 mm film or negative strips or medium-format (120/220) transparencies, slide the film into the corresponding holder, with the film's shiny side facing down. 35 mm film or negative strips Click Color Restoration 2. Click the Preview button at the bottom of the screen. 3. Select the Color Restoration checkbox. (If you're using Professional Mode, you may need to scroll to the bottom of the screen.) Scanning Film and Transparencies The scanner cover has a built-in transparency unit (film adapter). To scan film or negative strips, slides, or transparencies, you need to remove the document mat from the scanner cover and insert the film in a holder. The scanner comes with 3 different film holders: one for 35 mm film or negative strips, one for 35 mm slides, and one for medium-format (120/220) transparencies. 1. Make sure the film adapter cable is connected to the scanner (see the Start Here sheet for instructions). If you need to connect the cable, first turn the scanner off. Then turn it back on again after you connect the cable. 2. Lift the scanner cover all the way up and slide the reflective document mat up and off of the scanner cover. Medium-format transparencies: Slide the film into the holder as shown. Then lower the cover and press the tab to lock it in place. Cover tab Place the film holder on the scanner as shown. Make sure the white triangle on the holder points to the upper-right corner of the scanner. Make sure this calibration space is uncovered 8/03 EPSON Perfection 3170 - 5