Epson 3170 Product Information Guide - Page 6

EPSON Perfection 3170 If you are scanning slides, place the holder on the scanner. Then place the slides in the holder. (Place the slides so the "this side to lamp" indication is facing down.) 4. Close the scanner cover. 5. Start EPSON Scan and make sure the correct Document Type is selected: either Color Negative Film, B&W Negative Film, or Positive Film (for slides and transparencies). Indicator Light The indicator light (on the ] Start button) indicates the status of the scanner, as described below. Light On Flashing Flashing Off Color Status Green The scanner is ready to scan images. Green The scanner is initializing (warming up) or is busy scanning. Red Check the following, then turn your scanner off and back on to reset it: ❏ Make sure the transportation lock is turned to the unlocked position. See the Start Here sheet for details. ❏ Try restarting your computer and turning the scanner off and then on again. If this does not eliminate the error, the fluorescent lamp may need to be replaced or the scanner may have another problem. Consult your dealer or EPSON. - The scanner is unplugged or turned off. Related Documentation CPD-16343 CPD-16345 CPD-16344 - EPSON Perfection 3170 Photo Start Here poster EPSON Perfection 3170 Scanner Software CD-ROM EPSON Perfection 3170 Notices booklet Reference Guide (HTML) Select Dust Removal Tip: Make sure your film is dust-free for the best scan. You can also select the Dust Removal setting in EPSON Scan, as shown above. 6 - EPSON Perfection 3170 8/03