Epson 525W Installation Guide - Short-Throw Wall Mount (ELPMB45) - Page 4
Location, Caution
View all Epson 525W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Caution Do not install the wall mount in a location where the operating temperature for your projector model may be exceeded. Such an environment may damage the projector. Install the wall mount in a place free from excessive dust and humidity to prevent the lens or optical components from becoming dirty. Do not use excessive force when adjusting the wall mount. The wall mount may break, resulting in personal injury. Because the interactive module uses infrared communication, it could interfere with infrared communication from other products. If this happens, move the other product(s) out of the detection area. Location • Determine where you will install the wall mount and prepare the location in advance. Also, make sure there is a gap of 16 to 26 inches (410 to 660 mm) from the top of the image projected onto the white board to the ceiling. See "Positioning the Projector" on page 12 for more details. • Do not install the projector in a location where it might be subjected to vibration or shock. Vibration or shock could cause damage to the projector or mounting surface. It could also cause the wall mount or projector to fall, resulting in serious injury or death. • Before installing the projector, verify the power supply wiring for the installation location. • Install the projector away from other electric devices such as fluorescent lights or air conditioners. Some kinds of fluorescent lights could interfere with the remote control of the projector. • Install the projector away from direct sunlight and other bright light sources. • It is recommended to keep VGA computer cable length less than 66 feet (20 meters) to reduce external noise. 4