Epson 570e Product Information Guide - Page 4

EPSON LQ-570e Thickness Weight 0.0025 to 0.0055 inch (0.065 to 0.14 mm) Cut sheet feeder: 0.0028 to 0.0055 inch (0.07 to 0.14 mm) 14 to 24 lb (52 to 90 g/m2) Cut sheet feeder: 18 to 24 lb (64 to 90 g/m2) Single-sheet multipart forms: front entry only Width 3.9 to 10.1 inches (100 to 257 mm) Length 3.9 to 14.3 inches (100 to 364 mm) Copies 1 original + up to 4 copies Thickness 0.0047 to 0.015 inch (0.12 to 0.39 mm) Weight 12 to 15 lb (40 to 58 g/m2) Binding Line glue at the top of form Envelopes: top entry only Size No. 6 6.5 × 3.6 inches (165 × 92 mm) No. 10 9.5 × 4.1 inches (241 × 105 mm) Thickness 0.0063 to 0.0205 inch (0.16 to 0.52 mm) Weight 12 to 24 lb (45 to 90 g/m2) Postcards: front and top entry Width Front and top: 3.9 to 7.9 inches (100 to 200 mm) Cut sheet feeder: 3.9 to 5.8 inches (100 to 148 mm) Length Front: 5.8 to 7.9 inches (148 to 200 mm) Top: 3.9 to 7.9 inches (100 to 200 mm) Cut sheet feeder: 3.9 to 5.8 inches (100 to 148 mm) Thickness 0.0087 inch (0.22 mm) Weight 51 lb (192 g/m2) Continuous paper (standard and multipart): front, rear, and bottom entry Width 4 to 10 inches (101.6 to 254 mm) Length 4 to 22 inches (101.6 to 558.8 mm) Copies 1 original + up to 4 copies Thickness Printable area 0.0025 to 0.015 inch (0.065 to 0.39 mm) Perforated edges up to 0.035 inch (0.9 mm) Weight (not multipart) 14 to 22 lb (52 to 82 g/m2) Weight (1 multipart sheet) 12 to 15 lb (40 to 58 g/m2) Binding Point glue or paper staples on both sides (front, bottom, or rear entry) t The continuous multipart forms should be securely joined together along the left and right edges by crimping. Crimping should be pressed in from the original sheet side and go completely through all copy sheets. t The ratio of the cut/uncut length at the perforation should be between 3:1 and 5:1. t The perforation between pages should not extend all the way to the edges of the paper. t At the perforation between pages, the horizontal and vertical perforation cuts should not cross. t The thickness of the perforation part when extended should be 1 mm or less. Continuous paper with labels: front and bottom entry Label size (minimum) 0.938 × 2.5 inches (23.8 × 63.5 mm) 0.1 inch (2.5 mm) corner radius Backing sheet width 4 to 10 inches (101.6 to 254 mm) Backing sheet length 4 to 22 inches (101.6 to 558.8 mm) Backing sheet thickness 0.0028 to 0.0035 inch (0.07 to 0.09 mm) Total thickness 0.0063 to 0.0075 inch (0.16 to 0.19 mm) Label weight 17 lb (64 g/m2) Roll paper: rear entry with optional roll paper holder only Width 8.5 ± 0.12 inch (216 ± 3 mm) Thickness 0.0028 to 0.0035 inch (0.07 to 0.09 mm) Weight 14 to 22 lb (52 to 82 g/m2) Paper Alignment Front entry Printing starts at "0" on the scale. The unprintable area is to the left of the "0". 4 - EPSON LQ-570e 4/00