Epson 745c Product Information Guide - Page 12

Epson PowerLite 745c Projector 6. Select the appropriate settings for your mode: ESSID Ad Hoc: Enter an ESSID in the ESSID textbox. Access Point: Enter an ESSID, which is the SSID name of your access point or the name of your AirPort network. (The name of your AirPort network may be different from that of your AirPort base station; select your base station in the AirPort Admin utility and click Configure to check the name of your network.) Password for WEB control Projector keyword DHCP (Access Point mode only) IP address (Access Point mode only) Subnet mask. (Access Point mode only) Gateway address (Access Point mode only) Note that the ESSID is case-sensitive. If you want to create a password for an internal web page, you can enter up to 8 alphanumeric characters. Turn this option on if you want to set up a security keyword so that only people in the same room as the projector can access it. When you connect to the projector wirelessly, it displays a four-digit randomized keyword on the screen that you need to enter when prompted. If your access point assigns IP addresses automatically, turn this option on. Otherwise, turn it off and assign an IP address, subnet mask, and gateway address manually. Enter the IP address you want to assign the projector. It must be formatted like other addresses on the network; usually the first three sections match the access point's IP address. The last section should be unique. Enter a subnet mask formatted like other subnet masks on your network. Enter the IP address that was assigned to your access point or AirPort base station when it was set up. If you don't know the address, see "Checking the Gateway (Access Point's) IP Address" on page 14. 7. When done making settings, highlight the OK button at the top of the screen. Then press Enter. Highlight the OK button again and press Enter to return to the main EasyMP Network Screen. Configuring the Network Settings for Windows Before connecting to the projector wirelessly, make sure your computer is configured correctly. Also, make sure that the Internet Connection Firewall is disabled. (See your Windows online help system for details.) Note: Depending on your computer's wireless network adapter card, the dialog boxes you see may be different than those shown in this section. 1. Access your wireless network Properties window. For example, in Windows XP click Start > Control Panel > Network and Internet Connections. Then double-click the Network Connections icon. You see a screen similar to this: Right-click and select Properties 2. Right-click the Wireless Network Connection icon and select Properties. You see a screen like this: Click here 12 - Epson PowerLite 745c Projector 8/04