Epson 745c Product Information Guide - Page 16

Epson PowerLite 745c Projector 4. Once the name of your projector appears, select it and click Connect. If more than one projector is listed, you can select up to four additional projectors and connect to them at the same time. If the selected projector is being used by another person, you can still connect to it; doing so automatically disconnects the other user. 5. If you are prompted for a keyword, enter the four-digit number displayed on the EasyMP Network screen and click OK. 6. Once the connection is established, you see your computer's image transmitted to the projection screen, and a floating control bar: Lets you switch between the computer and EasyMP. Flashes three lights in sequence when the computer and projector connection is active. 8. When done with your presentation, click Disconnect on the control bar. Connecting in IP Connect Mode Even if your projector and computer are on a different subnet (Access Point mode only) or connecting over different routers, you can establish a connection manually using IP Connect Mode. 1. Start NS Connection on the computer to which you want to connect. You see this screen: Click here to minimize 7. From the control bar, you can access these NS Connection features: Provides help for NS Connection. Lists projectors and specifies which ones are in use. Lets you access the projector's menu system from an HTML browser window. Lets you keep the projected image on the screen, even if the image on your computer changes. Turns off the image and sound. Lets you zoom in on a part of the image. Lets you change the brightness, contrast, and color mode. Lets you switch between the Video and S-Video ports. 2. Click the Extension button. You see this screen: Click here 16 - Epson PowerLite 745c Projector 8/04