Epson 826W Operation Guide - EasyMP - Page 25
Procedure before using the Multi-screen Display Function, Setting the Virtual Display - driver
UPC - 010343873056
View all Epson 826W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Using Multi-Screen Display Procedure before using the Multi-screen Display Function 1. Setting the Virtual Display s p.25 In a Windows environment, enable the virtual display driver as necessary. And, for both Windows and Macintosh, set up the virtual display arrangement. 2. Allocating the image to be projected s p.30 Open the file to be projected, and then move the screen to the virtual display according to the actual projection arrangement. 3. The allocated image is projected s p.30 Allocate a virtual display number to a projector that is connected through the network, and then start projection. Setting the Virtual Display 13 25 • Those users who are using Macintosh computers. Procedure A Start Windows on the computer, then select "Start" "Programs" (or All Programs) - EPSON Projector Add-Remove EPSON Virtual Display. The Add-Remove EPSON Virtual Display screen is displayed. B Select the virtual display you want to use. Up to four monitors can be added. In this example, a single virtual display is to be used. When setting multiple virtual displays, select as many displays as is necessary. Any one of the displays can be selected. C Click "OK". Enable the virtual display driver (Windows only) Enable the virtual display driver. Those users listed below do not have to perform this operation. • Those users who have enabled virtual displays installing EMP NS Connection. When you click OK, the drivers for the virtual display are enabled. At this point, it is normal for the display to flicker. Wait for the Add-Remove EPSON Virtual Display screen to close.