Epson 875DC Product Information Guide - Page 9
EPSON Stylus Photo 875DC - printer head replacement
View all Epson 875DC manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
EPSON Stylus Photo 875DC Follow these steps to replace ink cartridges: 1. Make sure the printer is turned on and not printing (the Ppower light should be on, but not flashing). 2. Check the B black and A color ink out lights to see which ink cartridge you need to replace. 3. Open the printer cover and press the orange ink cartridge replacement button. The print head moves left and the Ppower light begins flashing. orange ink cartridge replacement button To avoid damaging the printer, never move the print head by hand. 4. The color cartridge is on the right and the black cartridge is on the left. Pull up the ink cartridge clamp all the way. The cartridge rises up from its holder. Keep ink cartridges out of the reach of children and do not drink the ink. If ink gets on your skin, wash the area thoroughly with soap and water. If ink gets in your eyes, flush them immediately with water. 6. Unwrap the ink cartridges, then remove only the yellow part of the tape seal on top. Don't pull off the blue part. Black ink cartridge Color ink cartridge Don't touch the green chips You must remove the yellow tape from the top of the cartridge or you will permanently damage it. Don't pull off the blue portion or try to remove the clear seal underneath the cartridge. Don't touch the green circuit board on the back of the cartridge; you may inhibit normal operation and printing. 7. Tilt the ink cartridge forward slightly as you lower it into its holder. Hang the tabs at the back of the cartridge on the hooks on the holder clamps. 5. Lift the cartridge out of the printer and dispose of it carefully. tabs hooks 4/00 EPSON Stylus Photo 875DC - 10