Epson AP-80 User Guide - Page 127
International Character Sets, five Japan, Norway, Denmark II, Spain II and Latin America can
View all Epson AP-80 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
The following tables describe the switches and their functions. The first two tables summarize the two groups of switches. The remaining table shows how to set the DIP switches for the available international character sets. Table D-1. DIP switch group 1 Switch number 1-1 1-2 1-3 1-4 1-5 1-6 1-7 1-8 Function Select condensed or normal characters Select slashed or unslashed zero Select character table Paper-out detection Select print quality Select international character set Action when ON Condensed Action when OFF Normal 0 Graphics Inactive NLQ 0 Italics Active Draft See Table D-3 Table D-2. DIP switch group 2 Switch number Function Action when ON Action when OFF 2-1 Select page length 12 inch 11 inch 2-2 Select cut sheet feeder mode Selected Not selected 2-3 Skip-over-perforation 1 inch None 2-4 Add line carriage return CR + LF CR only Note: The factory setting for all switches except 1-6, 1-7, and 1-8 is OFF. International Character Sets Thirteen international character sets are available in Epson mode. Eight of these are selected by DIP switches 1-6 to 1-8 and the remaining five (Japan, Norway, Denmark II, Spain II and Latin America) can be selected with the ESC R command, which is described in the Command Summary (Appendix A). For the characters available in each character set, see Appendix B. Defaults and DIP Switches D-3