Epson ActionLaser 1500 Product Support Bulletin(s) - Page 7
Status Sheet.
View all Epson ActionLaser 1500 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
PSB No: P-0095A Page: 5 of 6 18. Q. How does the automatic interface switching work with the ActionLaser 1000 and ActionLaser 1500? A. The ActionLaser 1500 comes standard with parallel and serial interfaces, allowing two users to share a single printer. By installing an optional third interface, three users can share the printer. The ActionLaser 1000 supports a single user with the standard parallel interface. With an optional interface installed, two users can share the printer. It is not necessary to connect the ActionLasers through a network or switchbox to activate the switching of the interface ports. Also, no control panel functions need to be made. Optional emulations will require more memory. The printer can receive data from one interface while printing data from the other interface. The first job received is the first to print. Each job prints completely before another begins printing. 19. Q. Can I get a print out of the current settings of the printer? A. Yes, to print the STATUS SHEET follow the steps below: 1. Press the SelecType Level 1 button to enter SelecType mode. 2. Press the down arrow button (CONTINUE) until "STATUS SHEET appears on the LCD screen. 3. Press the right arrow button (FEED) twice to execute the "STATUS SHEET". 4. After the page prints, press the ON LINE button once to return the printer to an on-line condition. 20. Q. Is there a separate "FONT SAMPLE" print of the internal fonts and cartridge fonts? A. Yes, to print the "FONT SAMPLE", follow the steps below: 1. Press the SelecType Level 1 button to enter SelecType mode. 2. Press the down arrow button (CONTINUE) until "FONT SAMPLE' appears on the LCD screen. 3. Press the right arrow button (FEED) twice to execute the "FONT SAMPLE". 4. After the page prints, press the ON LINE button once to return the printer to an on-line condition.