Epson ActionNote 866CX User Manual - ActionPort Replicator - Page 11
Specifications
View all Epson ActionNote 866CX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
Installing a PC Card To install a PC card in one of the slots, follow the instructions in Chapter 4 of your ActionNote 800 Series User's Guide. Your system configures most PC cards automatically. The upper slot on the replicator is slot 2 and the lower slot is slot 3. Use the CardView™ software installed on your ActionNote to monitor PC card usage and reconfigure your cards or system resources if necessary. Specifications Interfaces Parallel Serial Video PCMCIA slots Mouse Centronics® compatible; 25-pin, D-sub, fern ale connector; standard S-bit parallel; supports standard (AT compatible) and bi-directional (PS/2 compatible) modes Two RS-232C, programmable, asynchronous, 9-pin, D-sub male connectors Auto-sensing, 15-pin, D-sub, female connector for analog monitor Accept two Type 1 or II cards, or one Type I or II and one Type III; PCMCIA version 2.01 and JEIDA 4.1 compatible Auto-sensing, 6-pin, mini-DIN connector for a PSI 2-type pointing device ActionPort Replicator 7