Epson ActionNote 880 Product Information Guide - Page 1
Epson ActionNote 880 Manual
View all Epson ActionNote 880 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
EPSON ActionNote 800 Series Front View suspend/resume button 0 / trackpad \ hard disk drive compartment diskette drive * These parts function only with the optional audio card installed Rear Panel and Left Side security external keyboard or mouse pod / DC-in pod \ PC card slots *Available only with the optional internal fax/modem installed Notebook Specifications CPU and Memory CPU Upgradable 486 microprocessor installed in a PGA socket; includes 8KB of internal cache in write-back mode and integrated math coprocessor System speed Fast speed and slow speed (8 MHz) available; speed selection through Setup Memory ROM Video RAM Cache Clock/ calendar Controllers Video Diskette drive Hard disk PCMCIA Interfaces External VGA Parallel 4MB RAM soldered on the system board; configuration may include additional memory module; expandable up to 24MB using a 4,8,16, or 20MB memory expansion module 128KB Flash ROM device containing the system and video BIOS and Setup program code 512KB DRAM supports resolutions up to 640 x 480 in 256 colors on the color LCD and up to 1024 x 768 in 16 colors or 800 x 600 in 256 colors on external monitor 8KB internal; supports 256KB of external cache on a CPU daughterboard; selectable through Setup Real-time clock, calendar, and CMOS RAM; backed up by internal battery Chips and Technology® 65535 video controller; 32-bit local bus interface to the microprocessor; supports enhanced video modes on an external monitor; supports resolutions from 640 x 480 in 256 colors on the color LCD and up to 1024 x 768 in 16 colors on an external monitor; automatic external monitor detection; simultaneous display with LCD screen using Fn F10 command or software Built-in super I/O controller for one internal 3.5-inch diskette drive; supports 720KB and 1.44MB formats Built-in super I/O controller has interface to one 2.5-inch, IDE internal hard disk drive; automatically recognizes and configures drives up to 19 mm high that support the IDE interface Built-in Vadem® VG-468 controller for two stacked slots; supports two Type I or II cards, or one Type III; PCMCIA version 2.01 and JEIDA 4.1 compatible; supports low power and suspend modes; supports hot insertion (including ExCA standards); register compatible with Intel 82365SL Auto-sensing, 15-pin, D-sub, female connector for analog monitor Centronics® compatible; 25-pin, D-sub, female connector; standard S-bit parallel; supports standard (AT compatible) and bidirectional (PS/2 compatible) modes AN800-1