Epson ActionPrinter 3250 Product Support Bulletin(s) - Page 16
ESC t n1 n2 d1 d2 d3 Assign Character Table
View all Epson ActionPrinter 3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
PSB No: P-0082 Page: 10 of 14 ESC ( t n1 n2 d1 d2 d3 (Assign Character Table) ESC (t n1 n2 d1 d2 d3 is the command for assigning character tables where n1, n2, d1,d2, and d3 are variables. Currently, variables, n1, n2 and d3 MUST be n1=3, n2=0, and d3=0. Variable d1 is a number corresponding to one of the four tables selectable with the ESC t n command. This is the table that will be replaced. Valid values for d1 are 0,1,2, and 3 (see Table 1 below). Variable d2 is a number corresponding to a registered table. This is the table that will replace the table indicated by Variable d1. Valid Values for d2 are 0, 1,3,7,8, and 9 (see Table 2 below). Table 1 Table 2 After using the ESC ( t command, the ESC t n command MUST be sent to select the table before printing from the new table. For example, the command ESC ( t 3 0 1 3 0 is sent (assign Registered Table 3 (PC850) to Selectable Table 1 (PC437). In order to print the Q character (ASCII 245), the command ESC t 1 must be sent. In the Basic programming language, the sequence would be as follows: LPRINT CHR$(27);"(T);CHR$(3);CHR$(0);CHR$(1);CHR$(3);CHR$(0); LPRINT CHR$(27);"t";CHR$(1); LPRINT CHR$(245) Some ESC/P2 documentation may illustrate as many as 22 different Registered Tables. The Registered Tables are a part of the character set, therefore, they are contained in the Character Generator ROM. The CG ROM differs based upon the destination country. For this reason, only the above Registered Tables are available on LQ-570, LQ-1070, LQ-870 and LQ-1170 printers sold for the U.S. market. Foreign Character Generator ROMs ARE NOT available in the United States. The following