Epson ActionPrinter 3250 Product Support Bulletin(s) - Page 6
ink smearing sometimes occur on the outside edges of the printout
View all Epson ActionPrinter 3250 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
PSB No: P-0084A Page: 6 of 6 2 0 . Q. Why is the AP-3250's parallel cable connector located on the side of the printer instead of the rear like most other printers? A. Since the AP-3250 may be operated in two different positions it was necessary to relocate the parallel cable connector to the side of the printer. 21. Q. Can different fonts be selected on the AP-3250's front panel? A. Yes, different fonts may be selected from the AP-3250's front panel by using the font button. However, all font selections made from the front panel can be overridden by an software application program. The recommended method to select fonts is through the program that you are using to print. If the program does not provide font selection abilities, then the printer's font panel is very useful. 22. Q. When printing high density (360 x 360 DPI) bit-image graphics why does ink smearing sometimes occur on the outside edges of the printout with certain print patterns? A. The AP-3250 builds the graphic image by making multiple passes when printing high density graphics. Dependant upon the printed pattern and the ink absorption factor of the paper being used, ink smearing may occur on the edges of the printed pattern. This occurrence is much less noticeable when printing at resolutions lower than 360 x 360 DPI. Should this phenomenon be encountered, select a lower graphic resolution in your software program.