Epson ActionTower 3000 Product Information Guide - Page 3

EPSON ActionPC and ActionTower 8600 Power Supply Type 200 Watt, UL/TUV/CS A l isted, fan-cooled Input ran ges 98–132 VAC or 196–264 VAC; swi tchselectable Maximum output +5 VDC at 20 Amps, –5 VDC at 0.5 Amp +12 VDC at 8 Amps, –12 VDC at 0.5 Amp Freq uency 48 to 63 Hz Cabl es Two to system board, five to mass storage devi ces; for more th an fi ve devices, Y cables can be installed on th e ex istin g cabl es Option Slot Power Limits Output voltage (VDC) For all slots +5 Volts 12 Amps -5 Volts 0.4 Amp +12 Volts 4.0 Amps -12 Volts 0.4 Amp Physical Characteristics Dimension Width Depth Height Weight Slimline 16.8 inches (427 mm) 15.8 inches (401 mm) 4.4 inches (112 mm) 18.2 lb (8.3 kg) with one diskette drive, but without keyboard Tower 7.125 inches (181 mm) 16.25 inches (413 mm) 13.25 inches (337 mm) 20.6 lb (9.3 kg) with one diskette drive, but without keyboard Environmental Requirements Condition Temperature Humidity (non-condensing) Altitude Operating range 41° to 90° F (5° to 32° C) 20% to 90% -330 to 9,900 ft (-100 to 3,000 m) Storage range -4° to 140° F (-20° to 60° C) 10% to 90% -330 to 39,600 ft (-100 to 12,000 m) Jumper Settings CPU c loc k jumper settings CPU type * External clock speed JP12 JP17 JP29 Cyrix 6x86-P120+ (100 MHz) 50 MHz Open 1-2 Open Cyrix 6x86-P150+ (120 MHz) 60 MHz 3-4 1-2 Open Cyrix 6x86-P166+ (133 MHz) 66 MHz 1-2, 3-4 1-2 Open Pentium 75 MHz 50 MHz Open Open Open Pentium 90 MHz 60 MHz 3-4 Open Open Pentium 100 MHz 66 MHz 1-2, 3-4 Open Open Pentium 120 MHz 60 MHz 3-4 1-2 Open Pentium 133 MHz 66 MHz 1-2, 3-4 1-2 Open Pentium 150 MHz 60 MHz 3-4 1-2 1-2 Pentium 166 MHz 66 MHz 1-2, 3-4 1-2 1-2 * Default setting depends on speed of CPU Parallel port ECP mode DMA channel (DRQ) settings DMA channel DRQ1 DRQ3 * Default setting JP23 1-2 * 2-3 JP24 1-2 * 2-3  VGA DRAM jumper settings Timing mode Fast page mode EDO mode * Default setting JP3 1-2 * 2-3 JP20 1-2 * 2-3 Miscellaneous jumper settings Jumper number JP1 JP4 JP6 JP16 JP18 JP21 JP22 Jumper setting 1-2 Open * 2-3 * 1-2 2-3 * 1-2 1-2 Open * 5-6 * 3-4 1-2 1-2 * 2-3 1-2 * 2-3 J20 5-6, 7-8 * Open * Default setting Function Clear the CMOS SETUP values Normal CMOS operation 1MB video DRAM 2MB video DRAM System clock PCICLK/4 System clock PCICLK/3 Write-back cache Write-through cache +3.3 V CPU voltage +3.358 V - 3.36 V (VR) CPU voltage +3.525 V - 3.528 V (VRE) CPU voltage Enable VGA controller Disable VGA controller Enable serial ports and diskette drive controller Disable serial ports and diskette drive controller Use serial port for infrared (IR) device Use IR module connector for IR device 2/96 ActionPC and ActionTower 8600 - 3