Epson Artisan 1430 Start Here - Page 2

4 Load paper You can load various size plain and photo papers in the sheet feeder. For instructions on loading envelopes or a CD or DVD, see the online User's Guide. 1 Open the paper support and pull up the extensions. 5 Install software Note: If your computer does not have a CD/DVD drive, you can download the software from the Epson website (see "Epson technical support"). Caution: Be sure to close your other programs, including any screen savers and virus protection software, before beginning this software installation. 1 Make sure the printer is NOT CONNECTED to your computer. 2 Open the output tray and pull out the extensions. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. You can't install your software that way. 3 Slide the edge guide to the left. 4 Load paper printable side up (usually the whiter, brighter, or glossy side), against the right edge of the sheet feeder, and behind the tab. Then squeeze the left edge guide and slide it against the left edge of the paper, but not too tightly. 2 Insert the product CD. 3 Windows: If you see the AutoPlay window, click Run Setup.exe. If you see the User Account Control screen, click Yes or Continue. Mac OS® X: Double-click the Epson icon. 4 Click Install (Windows) or Continue (Mac OS X) and follow the instructions on your computer screen. Note: Don't load the paper sideways. Always load it short edge first. 5 When you see the Select Your Connection screen, check the "Connection options" section on the back of this sheet for more information. Choose your connection. Then click Next (Windows) or Continue (Mac OS X) and follow the instructions on your computer screen.