Epson BrightLink 436Wi Welcome Kit - Page 8

3 Calibrate Calibration coordinates the position of the pen with the location of your cursor. If the pen position and cursor location don't match, you can try auto calibration, or you can calibrate manually for even greater accuracy. You don't need a computer, and you won't need to calibrate again unless the projector or image is moved, or the image is resized. 1 To start calibration, press the User button on the remote control. 2 When you see the Auto Calibration screen, do one of the following: • Press Enter to try auto calibration, then wait until calibration is complete. • Select No, then press Enter and follow the steps below to calibrate manually. 3 When you see this screen, select Manual Calibration, then press Enter. Using the Remote Control Turn projector on/off Select from various image sources connected to the projector Access menu system for additional adjustments Calibrate Page through documents Temporarily turn off image Switch between computer and Easy Interactive Pen Enter Zoom in and out Stop video action 4 When you see this screen, press Enter to select Yes. For more information on using the remote control and cool time-saving buttons: • See the on-screen BrightLink User's Guide. • Go to the training section and watch a video or two at epson.com/brightlinkvideos (U.S.) or epson.ca/brightlinkvideos (Canada). 5 Touch the circles on the screen to perform manual calibration. For more detailed instructions, see the on-screen BrightLink User's Guide.