Epson BrightLink 696Ui Users Guide - Page 126
Setting the Remote Control ID, Projector ID, Enter, Parent topic, Related references
View all Epson BrightLink 696Ui manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 126 highlights
4. Select Projector ID and press Enter. 5. Press the arrow buttons on the remote control to select the identification number you want to use for the projector. Then press Enter. Repeat these steps for all the other projectors you want to operate from one remote control. Note: If you don't know the projector's ID, aim the remote control at the projector and press the ID button to temporarily display the projector's ID on the screen. Parent topic: Using Multiple Projectors Related references Projector Setup Settings - Extended Menu Setting the Remote Control ID The remote control's ID is set to zero by default so it can operate any compatible projector. If you want to set the remote control to operate only a particular projector, you need to set the remote control's ID to match the projector's ID. 1. Turn on the projector you want the remote control to operate with exclusively. 2. Make sure you know the projector's ID number as set in the Extended menu Projector ID setting. Note: If you have forgotten the projector's ID, aim the remote control at the projector and press the ID button to temporarily display the projector's ID on the screen. 126