Epson BrightLink Pro 1410Wi Quick Reference - Page 2

1 Turning on and Calibrating the Projector To turn on the projector, press the red or orange power button on the remote control, control pad, or on the projector itself. Calibration coordinates the position of the pen with the location of your annotations. Your projector may already be calibrated. If not, follow the instructions below: 1 To calibrate automatically, press the User button on the remote control. You see the following: 2 Press Enter to select Yes. A pattern appears. 3 Wait until calibration is complete. If you see a message that calibration failed, or the pen position and cursor location don't match, you can calibrate manually. Press the Menu button on the remote control, then select Extended menu > Easy Interactive Function > Manual Calibration and press Enter. Follow the instructions on the screen to calibrate manually. Using the Remote Control Turn projector on/off Capture the projected image Access menu system for additional adjustments Auto-calibrate Print the projected image Select from various image sources connected to the projector Save the projected image Select whiteboard mode (turns on the projector if it is off) Switch between annotation mode and interactive computer mode Enter Page through documents Project 2 images at the same time For more information on using the remote control, see the online User's Guide. You can install a link to the User's Guide by inserting the BrightLink Pro 1410Wi CD. Or go to epson.com/brightlinkdownloads (U.S.) or epson.ca/brightlinkdownloads (Canada).