Epson BrightLink Pro 1410Wi Quick Reference - Page 3
Using the Pens and the Control Pad - installation guide
View all Epson BrightLink Pro 1410Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 3 highlights
2 Using the Pens and the Control Pad The projector came with 2 pens that have different colored ends, orange and blue. Make sure one AA battery is installed in each pen. Battery light Power switch • To turn on the pen, slide the power switch. The green light comes on briefly. If the battery is low, the light flashes. • Hold the pen perpendicular to the board, as shown below. Do not cover the black section of the pen. Turn projector on/off Capture the projected image (switch to whiteboard to paste the captured image) Connect USB cable from computer (on bottom of control pad) Note: The pens turn off automatically after about 20 minutes of inactivity. Slide the switch to turn the pen back on. Remove the top cover to install batteries or connect the control pad to the projector or to a printer. See the online User's Guide for more information. Select whiteboard mode (turns on the projector if it is off) Select from various image sources connected to the projector Save the projected image Print the Connect USB thumbdrive projected image