Epson BrightLink Solo 3 Interactive Module ELPIU03 Quick Setup Guide - Page 2
Installation Manual
View all Epson BrightLink Solo 3 Interactive Module ELPIU03 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
a Insert the Interactive Unit into the ELPMB27 attachment plate. b Use the M4 x 10 mm bolt with washer and spring washer to secure the Interactive Unit. c Remove the USB cover, and then connect the USB cable. d Attach the USB cover, and then secure it using the M3 x 8 mm cross-head screw. e Adjust the length of the USB cable. Next, go to step 9 in the ELPMB27 Installation Manual and install the ELPMB27 arm cover, adjust the screen position, then install the interface cover bracket and covers.
Insert the Interactive Unit into the ELPMB27 attachment plate.
a
Use the M4 x 10 mm bolt with washer and spring washer to secure the Interactive Unit.
b
Remove the USB cover, and then connect the USB cable.
c
Attach the USB cover, and then secure it using the M3 x 8 mm cross-head screw.
d
Adjust the length of the USB cable.
e
Next, go to step 9 in the ELPMB27
Installation Manual
and install the ELPMB27 arm cover, adjust the screen
position, then install the interface cover bracket and covers.