Epson C107001 Product Information Guide - Page 2

Electrical, Environmental, Paper - lq 570 printer

Page 2 highlights

LQ-570/1070 Electrical Rated voltage: Input voltage range: AC 120 V (120 V model) AC lcr3.5 to 132 V (120 V model) Rated cuwen t: 2.0 A (120 V model) Power cunsrrnption: (during self-test printing in draft mode, at 10 cpi) Approx. 33 W (120 V model) Ratedfrequency range: 50 to 60 Hz Inputfrequency range: 49.5 to 60.5 Hz Insulation resistance: 10 MR minimum (at DC 500 V between AC power line and chassis) Dielectric strength (between AC line and chassis): Environmental 120 V model: AC 1.0 kV (rms), 1 minute or AC 1.2 kV (rms), 1 second Temperature: Operation: 5" to 35°C (41" to 95°F) Storage: -30" to 60°C (-22' to 140OF) Humidity: Paper Operation: 10% to 80% RH without condensation Storage: 5% to 85% RH without condensation Single sheets: Width top front Length Thickness weight 148 to 257 mm (5.8 to 10.1 inches) for LQ570 148 to 420 mm (5.8 to 16.5 inches) for LQ-1070 182 to 257 mm (7.2 to 10.1 inches) for LQ570 182 to 364 mm (7.2 to 14.3 inches) for LQ1070 364 mm (14.3 inches) maximum 0.065 to 0.14 mm (0.0025 to 0.0055 inches) 52.3 to 90 g/m2 (14 to 24 lb) Sing&sheet multi-part forms: Width 182 to 216 mm (7.2 to 8.5 inches) for LQ-570 182 to 364 mm (7.2 to 14.3 inches) for LQ-1070 Length copies 257 mm to 297 mm (10.1 to 11.7 inches) Four sheets (1 original plus up to 3 copies) Thickness 0.12 to 0.32 mm (0.0047 to 0.012 inches) Weight 40 to 58 g/m* (12 to 15 lb) per sheet l Load single-sheet multi-part forms only into the front slot. l Use orily carbonless multi-part forms. Continuous paper: Width Copies Thickness Weight 101 to 254 mm (4 to 10 inches) for LQ-570 101 to 406 mm (4 to 16 inches) for LQ1070 Four sheets (1 original plus up to 3 copies) 0.065 to 0.10 mm (0.0025 to O.OU.39 inches) for one sheet 0.065 to 0.32 mm (0.0025 to 0.012 inches) total 52.3 to 82 g/m* (14 to 22 lb) for one sheet 40 to 58 g/m* (12 to 15 lb) per sheet in multi- part forms l Use only carbonless multi-part forms. lRbd5: Size Thickness Envelopes: Size Thickness Weight 63.5 x 23.8 mm (2% x 15/16 inches) 101 x 23.8 mm (4 x 15/16 inches) 101 x 27 mm (4 x 17/16 inches) 0.07 to 0.09 mm (O.OM8 to 0.0031 inches) for backing sheet 0.16 to 0.19 mm (O.OCKi3 to 0.0075 inches) total l Use continuous type labels only. l Use labels only under normal temperature and humidity conditions. No. 6-166 x 92 mm (6.5 x 3.6 inches) No. 10-240 x 104 mm (9.5 x 4.1 inches) 0.16 to 0.52 mm (0.0063 to 0.0197 inches) 45 to 91 g/m2 (12 to 15 lb) l Use envelopes only under normal temperature and humidity conditions. l insert envelopes into the top slot only. Printable area: Single sheets A The minimum top margin is 8.5 mm (0.33 inches). The minimum left and right margins are 3 mm (0.12 inches). However, the maximum printable width is 203 mm (8 inches) for LQ-570 or 345 mm (13.6 inches) for LQ1070. Printable area The minimum bottom margin is 13.5 mm (0.53 inches). Continuous puper The xninimum top and bottom margins (above and below the perforation) are 9 mm (0.35 inches). The minimum left and right margins are 13 mm (0.51 inches). However, the maximum printable width is 203 mm (8 inches) for LQ570 or 345 mm (13.6 inches) for LQ1070 Envelopes A The minimum top margin is 8.5 mm (0.33 inches). B The minimum left and right margins are 3 mm (0.12 inches). C T h e minimum bottom margin is 13.5 mm (0.53 inches). Printable area LQ-570/1070-2 8/20/91 24-Pin Printers

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7

LQ-570/1070
Electrical
Rated voltage:
AC 120 V (120 V model)
Input voltage range:
AC
lcr3.5
to 132 V (120 V model)
Rated
cuwen
t:
2.0 A (120 V model)
Power
cunsrrnption:
(during self-test printing in draft mode,
at 10 cpi) Approx. 33 W (120 V model)
Ratedfrequency
range: 50
to 60 Hz
Inputfrequency
range: 49.5
to 60.5 Hz
Insulation resistance:
10
MR
minimum (at DC 500 V between AC
power line and chassis)
Dielectric
strength
(between
AC line and chassis):
120 V model:
AC 1.0
kV
(rms), 1 minute
or AC 1.2
kV
(rms), 1 second
Environmental
Temperature:
Humidity:
Paper
Single sheets:
Width
top
front
Length
Thickness
weight
Operation:
5”
to 35°C (41” to 95°F)
Storage:
-30”
to
60°C
(-22’
to
140OF)
Operation: 10% to 80% RH without
condensation
Storage: 5% to 85% RH without condensation
148 to 257 mm (5.8 to 10.1 inches) for
LQ570
148 to 420 mm (5.8 to 16.5 inches) for LQ-1070
182 to 257 mm (7.2 to 10.1 inches) for LQ570
182 to 364 mm (7.2 to 14.3 inches) for LQ1070
364 mm (14.3 inches) maximum
0.065 to 0.14 mm (0.0025 to 0.0055 inches)
52.3 to 90
g/m2
(14 to 24 lb)
Sing&sheet
multi-part forms:
Width
Length
copies
Thickness
Weight
Continuous paper:
Width
Copies
Thickness
Weight
182
to 216 mm (7.2 to 8.5 inches) for LQ-570
182 to 364 mm (7.2 to 14.3 inches) for LQ-1070
257 mm to 297 mm (10.1 to 11.7 inches)
Four sheets (1 original plus up to 3 copies)
0.12 to 0.32 mm (0.0047 to 0.012 inches)
40 to 58
g/m*
(12 to 15 lb) per sheet
l
Load single-sheet multi-part forms only
into the front slot.
l
Use
orily
carbonless multi-part forms.
101 to 254 mm (4 to 10 inches) for LQ-570
101 to 406 mm (4 to 16 inches) for LQ1070
Four sheets (1 original plus up to 3 copies)
0.065 to 0.10 mm (0.0025 to
O.OU.39
inches) for
one sheet
0.065 to 0.32 mm (0.0025 to 0.012 inches) total
52.3 to 82
g/m*
(14 to 22 lb) for one sheet
40 to 58
g/m*
(12 to 15 lb) per sheet in
multi-
part forms
l
Use only carbonless multi-part forms.
LQ-570/1070-2
lRbd5:
Size
Thickness
Envelopes:
Size
Thickness
Weight
63.5 x 23.8 mm
(2%
x
15/16
inches)
101 x 23.8 mm (4 x
15/16
inches)
101 x 27 mm (4 x
17/16
inches)
0.07 to 0.09 mm
(O.OM8
to 0.0031 inches) for
backing sheet
0.16 to 0.19 mm
(O.OCKi3
to 0.0075 inches) total
l
Use continuous type labels only.
l
Use labels
only
under normal temperature
and humidity conditions.
No. 6-166 x 92 mm (6.5
x
3.6 inches)
No. 10-240 x 104 mm (9.5 x 4.1 inches)
0.16 to 0.52 mm (0.0063 to 0.0197 inches)
45 to 91 g/m2 (12 to 15
lb)
l
Use envelopes only under normal
temperature
and
humidity conditions.
l
insert
envelopes into the top slot only.
Printable area:
Single sheets
The minimum top margin
is 8.5 mm (0.33 inches).
The minimum left
and
right margins are 3 mm
(0.12 inches). However,
the maximum printable
width is 203 mm (8 inches)
for LQ-570 or 345 mm
(13.6 inches) for LQ1070.
The minimum bottom
margin is 13.5 mm
(0.53 inches).
Continuous
puper
The
xninimum
top and
bottom margins (above
and below the perforation)
are 9 mm (0.35 inches).
The minimum left and
right margins are 13 mm
(0.51 inches). However,
the maximum printable
width is 203 mm (8 inches)
for
LQ570
or 345 mm
(13.6 inches) for
LQ1070
Envelopes
A The minimum top
margin is 8.5 mm
(0.33 inches).
B The minimum left
and right margins
are 3 mm (0.12 inches).
C T h e minimum bottom
margin is 13.5 mm
(0.53 inches).
8/20/91
A
Printable
area
Printable area
24-Pin Printers