Epson C11C486001 Start Here Card - Page 2

Print, Load Paper, Install Software - driver

Page 2 highlights

5 Load Paper 1 Fan a few sheets of paper and place them against the right edge guide. Don't push the paper in. Don't load paper above this arrow 2 Slide the left edge guide against the paper, but not too tightly. 3 Pull out the output tray extensions. 6 Install Software Follow the appropriate section below to install the printer software on Windows XP, Windows Me, Windows 98, or Macintosh OS 8.6 through 9.x. For instructions on installing the software on Windows 2000, 95, or NT 4.x, or on Macintosh OS X, see your Printer Basics book. Windows XP 1 Turn on your computer. (Make sure your printer is still on.) 2 Wait for this screen to appear. NOTE: If you don't see the Found New Hardware screen, make sure your printer is on and your cable is securely connected to your printer's port. 3 Put the EPSON CD-ROM in your drive. 4 Wait while the files are copied to your computer. 5 Click Finish when you see this screen. 6 You see the license agreement. Read the agreement and click Agree. You see the Options Menu. Continue with the "Finishing Windows Installation" instructions to the right to complete your software installation. Continued in next column Windows Me and 98 1 Turn on your computer. (Make sure your printer is still on.) Wait until you see the Add New Hardware Wizard. Windows Me 2 Put the EPSON CD-ROM in your drive. Windows 98 3 After a moment, click Next on the Add New Hardware Wizard screen. Me If you're running Windows Me, go to step 7. 98 If you're running Windows 98, continue with step 4. 4 When you see this screen, click Next again. 5 You see a screen asking where you want Windows to search. Click CD-ROM drive. Then click Next. 6 Click Next on the following screen. 7 When you see a screen like this one, click Finish. 8 Do one of the following: Me Click Next on the next screen. 98 Click Next on each of the four screens that follow. 9 When you see this screen, click Finish. Then wait while the files are copied to your computer. 10 Click Finish when you see this screen. 11 You see the license agreement. Read the agreement and click Agree to continue installation. You see the Options Menu. Continue with the instructions below under "Finishing Windows Installation" to complete your software installation. Finishing Windows Installation 1 When you see this screen, make sure you have paper in the printer, then click Print a Test Page to check that your printer is set up correctly. 2 Optionally, click Install EPSON Software Film Factory and follow the on-screen instructions. 3 Click Install Manual and Printer Movies and follow the on-screen directions to install the EPSON Printer Information Center on your desktop. 4 When you're finished, click Exit to close the Options Menu. 5 When you see the EPSON Product Registration screen, register your printer as instructed, then remove your CD-ROM. You're ready to print! See the details in section 7. Macintosh OS 8.6 through 9.x 1 Turn on your Macintosh. Then put the EPSON CD-ROM in your drive. 2 Double-click EPSON in your CD-ROM window. (You may have to double-click EPSON on your desktop to open the window.) 3 Read and agree to the license agreement to continue the installation. 4 Click Install Printer Driver and follow the on-screen instructions. 5 After your Macintosh restarts, register your printer with EPSON as instructed. 6 Open the Chooser and select your C82 Series printer icon. 7 Select your USB port and turn on background printing. Then close the Chooser. 8 Optionally, click Install EPSON Software Film Factory on the Main Menu and follow the on-screen instructions to install the software. NOTE: You may have to double-click to open the Main Menu. EPSON in your CD-ROM window 9 Click Install Manual and Printer Movies and follow the on-screen instructions to install the EPSON Printer Information Center on your desktop. 10 When you're finished, click Exit. Then remove the CD-ROM and keep it in case you need to reinstall any software later. You're ready to print! For more information, see section 7. 7 Print Now you're ready to print. For instructions, use these resources: • Your Printer Basics book Learn about loading paper, printing, maintaining your printer, solving problems, and contacting EPSON. • EPSON Printer Information Center on your desktop Click Print Show to view helpful animations that show you how to change ink cartridges and perform other tasks. Click Reference Guide to view more information about your printer. Use genuine EPSON inks and paper to get the best results from your printer. You can purchase ink cartridges, paper, and accessories from your local retailer or from the EPSON StoreSM at (800) 873-7766, or visit www.epsonstore.com (U.S. sales only). In Canada, please call (800) 463-7766 for dealer referral. EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON Software is a trademark and EPSON PhotoCenter and EPSON Store are service marks of Epson America, Inc. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims any and all rights in those marks. Copyright © 2002 by Epson America, Inc. Printed on recycled paper. Printed in USA. 08/02

  • 1
  • 2

Print
Print
1
Fan a few sheets of paper and place them against the right edge guide.
Don’t push the paper in.
2
Slide the left edge guide against the paper, but not too tightly.
3
Pull out the output tray extensions.
Load Paper
Load Paper
Install Software
Install Software
EPSON and EPSON Stylus are registered trademarks of SEIKO EPSON CORPORATION. EPSON Software is a trademark and EPSON PhotoCenter and
EPSON Store are service marks of Epson America, Inc.
General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. EPSON disclaims
any and all rights in those marks.
Copyright © 2002 by Epson America, Inc. Printed on recycled paper. Printed in USA.
08/02
Now you’re ready to print. For instructions, use these resources:
Your
Printer Basics
book
Learn about loading paper, printing, maintaining your
printer, solving problems, and contacting EPSON.
EPSON Printer Information Center on your desktop
Click
Print Show
to view helpful animations that show you
how to change ink cartridges and perform other tasks.
Click
Reference Guide
to view more information about
your printer.
Use genuine EPSON inks and paper to get the best results
from your printer. You can purchase ink cartridges, paper,
and accessories from your local retailer or from the EPSON
Store
SM
at (800) 873-7766, or visit
www.epsonstore.com
(U.S. sales only). In Canada, please call (800) 463-7766 for
dealer referral.
Follow the appropriate section below to install the printer software on Windows XP,
Windows Me, Windows 98, or Macintosh OS 8.6 through 9.x.
For instructions on installing the software on Windows 2000, 95, or NT 4.x,
or on Macintosh OS X, see your
Printer Basics
book.
Windows XP
1
Turn on your computer. (Make sure your printer is still on.)
2
Wait for this screen to appear.
NOTE: If you don’t see the Found New
Hardware screen, make sure your printer
is on and your cable is securely connected
to your printer’s port.
3
Put the EPSON CD-ROM in your drive.
4
Wait while the files are copied to your computer.
5
Click
Finish
when you see this screen.
6
You see the license agreement.
Read the agreement and click
Agree
.
You see the Options Menu. Continue with the
“Finishing Windows Installation” instructions to
the right to complete your software installation.
Continued in next column
Don’t load paper
above this arrow
Windows Me and 98
1
Turn on your computer. (Make sure your printer is still on.) Wait until you see the
Add New Hardware Wizard.
2
Put the EPSON CD-ROM in your drive.
3
After a moment, click
Next
on the
Add New Hardware Wizard screen.
If you’re running Windows Me,
go to step 7.
If you’re running Windows 98,
continue with step 4.
4
When you see this screen, click
Next
again.
5
You see a screen asking where you want
Windows to search. Click
CD-ROM drive
.
Then click
Next
.
6
Click
Next
on the following screen.
7
When you see a screen like this one,
click
Finish
.
8
Do one of the following:
Click
Next
on the next screen.
Click
Next
on each of the four screens
that follow.
9
When you see this screen, click
Finish
. Then
wait while the files are copied to your
computer.
10
Click
Finish
when you see this screen.
11
You see the license agreement.
Read the agreement and click
Agree
to continue installation.
You see the Options Menu. Continue with
the instructions below under “Finishing
Windows Installation” to complete your
software installation.
Finishing Windows Installation
1
When you see this screen, make sure you have
paper in the printer, then click
Print a Test Page
to check that your printer is set up correctly.
2
Optionally, click
Install EPSON Software
Film Factory
and follow the on-screen instructions.
3
Click
Install Manual and Printer Movies
and follow
the on-screen directions to install the EPSON Printer
Information Center on your desktop.
4
When you’re finished, click
Exit
to close the Options Menu.
5
When you see the EPSON Product Registration screen, register your
printer as instructed, then remove your CD-ROM.
You’re ready to print! See the details in section 7.
98
Me
98
Me
Macintosh OS 8.6 through 9.x
1
Turn on your Macintosh. Then put the
EPSON CD-ROM in your drive.
2
Double-click
EPSON
in your CD-ROM window.
(You may have to double-click
EPSON
on your
desktop to open the window.)
3
Read and agree to the license agreement to
continue the installation.
4
Click
Install Printer Driver
and follow the
on-screen instructions.
5
After your Macintosh restarts, register your
printer with EPSON as instructed.
6
Open the Chooser and select your
C82 Series
printer icon.
7
Select your USB port and turn on background
printing. Then close the Chooser.
8
Optionally, click
Install EPSON Software Film Factory
on the Main Menu and
follow the on-screen instructions to install the software.
NOTE: You may have to double-click
EPSON
in your CD-ROM window
to open the Main Menu.
9
Click
Install Manual and Printer Movies
and follow the on-screen instructions to
install the EPSON Printer Information Center on your desktop.
10
When you’re finished, click
Exit
. Then remove the CD-ROM and keep it in case
you need to reinstall any software later.
You’re ready to print! For more information, see section 7.
6
6
5
5
7
7
Windows Me
Windows 98