Epson C31C625A8741 Reference Guide - Page 54
Before turning on the printer, be sure to turn on the customer display DM-D. If you reverse
View all Epson C31C625A8741 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
Note: UB-U01III has bus-powered USB HUB. Therefore This USB model printer can't be connected directly to other bus powered HUBs (including other USB model TM printers) or bus-powered functions with current consumption over 100mA. If you would like to connect other USB model TM printers with UB-U01III, use a self powered USB HUB as shown in the above figure. The host PC needs to have an installed "USB device driver" for using USB model TM printer. See "Downloading Drivers, Utilities, and Manuals" on page 2-9. See the readme_e.txt of the driver for the procedure for installing. EPSON does not supply the port driver or similar program necessary to control the USB interface printer with the ESC/POS commands. Control it with the driver (APD, OPOS or JavaPOS). If you connect a customer display (DM-D), set DIP switch settings as follows. For details, see the User's Manual packed with your customer display. Item Transmission setting Transmission speed Parity Data word length Selection 19200 bps None 8 bits Before turning on the printer, be sure to turn on the customer display (DM-D). If you reverse the order, the customer display will not be recognized correctly. To satisfy the EMI standard, be sure to mount the ferrite core on the display module cable. To mount the ferrite core, put the display module cable into the ferrite core. See also "FAQ" on page C-1 for more details. 2-10 System Planning Rev. B