Epson CX4400 Product Information Guide - Page 10

Epson Stylus CX4400 Series 7. Before you open the new ink cartridge package, shake it four or five times. Then remove it from the package. 11. Hold the scanner while you release the support. Then close the scanner. Caution: Do not touch the green chip on the front of the cartridge. This can damage the ink cartridge. 8. Remove the yellow tape from the bottom of the ink cartridge. Caution: Do not remove any other labels or seals, or ink will leak. 9. Place the new ink cartridge into the cartridge holder and push it down until it clicks into place. 10. Once you have replaced all the cartridges that need replacing, close the ink cartridge cover and press it until it clicks into place. 12. Press the y Stop button to begin charging the ink. This takes about one and a half minutes. When it's finished, the On light stops flashing and remains on, and the B ink light goes out. Caution: Never turn off the CX4400 Series while the On light is flashing or you'll waste ink. If the B ink light flashes, press the y Stop button and press down all the cartridges securely. Aligning the Print Head If your printouts look grainy or blurry, or you see light or dark bands across them, you may need to align the print head. Note: Banding may also occur if your print head nozzles need cleaning. 1. Turn on the CX4400 Series. 2. Load several sheets of paper. 3. Windows: Right-click the printer icon on your taskbar (in the lower right corner of your screen). Select Print Head Alignment. Macintosh OS X: Open the Applications folder and select EPSON Print Utility. Select your CX4400 Series in the printer list, click OK, and select Print Head Alignment. 4. Follow the instructions on the screen to print an alignment sheet. Note: Do not press the y Stop button to cancel printing of the alignment sheet. 10 5/07