Epson CX6600 Start Here Card - Page 6

11 Follow the instructions on the screen to install additional software. When done, click Exit. 12 When you see the Product Registration screen, register your Stylus CX as instructed, then remove the CD-ROM and restart your computer. Now you're ready to copy, scan, and print. See the Quick Guide or your on-screen CX6600 Reference Guide for instructions. Macintosh 1 Insert your Stylus CX software CD-ROM into your CD-ROM or DVD drive. 2 Double-click the Epson CD-ROM icon, if necessary. Then double-click the Epson installer icon. You see this screen: 3 Click Install. 4 Read the license agreement, then click Agree. Note: If you're installing on Macintosh OS X, enter your administrator name and password, if necessary. 5 For Macintosh OS X: Continue with the following steps. For Macintosh OS 9: Follow any on-screen instructions, then continue with step 9. 6 Click Install at the EPSON Scan Installer screen to install the scanner portion of your software. 7 When the software finishes installing, you see this screen. Click Quit. 8 Follow the on-screen instructions to install additional software. Note: Click Quit when each part finishes installing. 9 When installation is complete, you see the Additional Software screen. Follow the instructions on the screen to install the software. When done, click Exit. 10 When you see the Product Registration screen, register your Stylus CX as instructed, then remove the CD-ROM and restart your Macintosh. 11 Make sure your Stylus CX is turned on, then lift up the scanner. 12 Remove the yellow sticker and plug the square end of the USB cable into the USB port on your Stylus CX. Then route the cable in the slot as shown. Caution: Make sure the USB cable fits securely into the slot. The USB connector may snap if the cable is not routed correctly in the slot and the scanner is closed with force. 13 Close the scanner carefully. continue