Epson ColorWorks CW-C6500A Technical Reference Guide - Page 43

Chapter2 Setup Installing the Printer Driver and Connecting to a Computer Install the necessary software downloaded from the web site, and then establish connection with the printer, and make required settings. If a CD-ROM came with the printer, use the CD-ROM referring to "Setup using Install Navi" on page 45. How to Get the Software You can get the software from the following website. For customers in North America, go to the following web site: www.epson.com/support/ For customers in other countries, go to the following web site: www.epson-biz.com/ How to Connect to a Computer Connect the interface cable to be used to the connector on the back of the printer. When connecting with a USB cable, pass the cable through the wire saddle to prevent accidental disconnection. How to Configure the Network Settings Follow the procedure below to set up the IP address of the printer.  To connect to the printer via Ethernet, the network settings are required. When connecting to the printer via USB, the network settings are not required.  Before starting the network settings, ask your network administrator for information required for the network settings. 1 Turn the printer on. 2 Select [Menu] and then press the [OK] button. 3 Select [General Settings] and then press the [OK] button. 4 Select [Network Settings] and then press the [OK] button. 5 Select [Advanced] and then press the [OK] button. 43