Epson ELPMBATA Installation Guide - Page 7
Mounting Projector to Grid Plate
![]() |
UPC - 010343868595
View all Epson ELPMBATA manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
Mounting Projector to Grid Plate 1. Turn the projector (P) upside down and place it flat on a soft cloth or packaging material. Remove or adjust the feet to be as flush as possible to the projector bottom. 2. Place the Grid Plate (F) on the bottom of the projector and line it up so the mounting inserts of the projector (P) can be seen through the holes of the Grid Plate (F). (NOTE: see pages 8-9 for which mounting holes to use for your model projector) 3. Select the screws (G) for your projector (see pages 8-9 for proper hardware to use for your model projector) 4. Attach the Grid Plate (F) to the projector using these screws (G) and washers (H). Turn until snug. Do not over tighten. Soft Cloth or Packaging Material INSTALLATION MANUAL NOTE: The 400W need 3/8" Spacers (J) to level the Grid Plate (F). Place the Spacers (J) over the mounting inserts and then place the Grid Plate (F) on top of the Spacers (J) lining up the proper holes of the Grid Plate (F) with the projector's (P) mounting inserts. 7
![](/manual_guide/products/epson-elpmbata-installation-guide-6415523/7.png)