Epson EMP 5300 Owners Manual - Page 36
Connecting to a Macintosh desktop, computer, Connect either end of the computer cable to the small
View all Epson EMP 5300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Connecting to a Macintosh desktop computer Before beginning, make sure that the projector and computer are both turned off. 1. Connect the computer cables. MAC desktop adapter Video cable adapter MAC monitor adapter Monitor cable Computer cable ♦ Note: Macintosh computer configurations vary. See your computer manual for the location of the ports needed to connect your EMP-7300/7200/5300 projector. a. Connect either end of the computer cable to the projector's Computer 1 port. The Computer 2 port is used when connecting a second computer. b. Set the DIP switches of the Mac desktop adapter in accordance with the resolutions you want to use (i.e. 16" mode). c. Connect either end of the computer cable to the small terminal of the desktop adapter. d. Disconnect the monitor cable from the computer and connect it to the large terminal (D-sub 15 pin) of the desktop adapter. s s s s 16 Installation