Epson EMP-710 User Manual - Page 29
Connect the 6-pin mini-DIN end of the PS/2 mouse
View all Epson EMP-710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Connecting the Mouse Cables If you want to use the remote control as a mouse, you need to connect the PS/2 mouse cable or USB mouse cable. Refer to this illustration while following the steps below. Mouse/Com port PS/2 mouse cable USB mouse cable 1. Connect the 9-pin end of the PS/2 mouse cable or USB mouse cable to the Mouse/Com or USB Mouse port on the projector. 2. Connect the 6-pin (mini-DIN) end of the PS/2 mouse cable or USB mouse cable to the external mouse port or USB port on your laptop. 3. Configure your laptop to work with an external mouse. s s s s s Connecting to a Computer 11
Connecting to a Computer
■
■
■
■
■
11
Connecting the Mouse Cables
If you want to use the remote control as a mouse, you need to
connect the PS/2 mouse cable or USB mouse cable.
Refer to this illustration while following the steps below.
1.
Connect the 9-pin end of the PS/2 mouse cable or USB
mouse cable to the Mouse/Com or USB Mouse port on
the projector.
2.
Connect the 6-pin (mini-DIN) end of the PS/2 mouse
cable or USB mouse cable to the external mouse port or
USB port on your laptop.
3.
Configure your laptop to work with an external mouse.
Mouse/Com port
PS/2 mouse cable
USB mouse cable