Epson EMP-710 User Manual - Page 77
correct, and then press it into place securely. Tighten
View all Epson EMP-710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
2. Remove the lamp cover after the unit is cool. It will normally take about an hour to completely cool down. Loosen a lamp cover-mounting screw with the screwdriver provided with the spare lamp, then remove. Screwdriver 3. Loosen two mounting screws for the lamp with the same screwdriver, and pull out the lamp using the handle. 4. Mount new lamp. Check that the lamp orientation is correct, and then press it into place securely. Tighten the mounting screws for the lamp with the screwdriver. 5. Remount the lamp cover. Tighten the lamp cover screw with the screwdriver. s s s s s Replacing the Lamp 59
Replacing the Lamp
■
■
■
■
■
59
2.
Remove the lamp cover after the unit is cool. It will
normally take about an hour to completely cool down.
Loosen a lamp cover-mounting screw with the screwdriver
provided with the spare lamp, then remove.
3.
Loosen two mounting screws for the lamp with the same
screwdriver, and pull out the lamp using the handle.
4.
Mount new lamp. Check that the lamp orientation is
correct, and then press it into place securely. Tighten the
mounting screws for the lamp with the screwdriver.
5.
Remount the lamp cover.
Tighten the lamp cover screw with the screwdriver.
Screwdriver