Epson EPL-6000 Product Support Bulletin(s) - Page 13

Pull 1st - parts

Get Epson EPL-6000 PDF manuals and user guides View all Epson EPL-6000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 13 highlights

PSB No: P-0074 Page: 2 of 2 Whenever a paper jam occurs you must remove the processing tray (which includes the Developer Unit and the Drum Unit). Do not remove the jammed paper by pulling the paper to the right (toward the paper supply tray) as this could break the Transfer Charger wire. The proper method of removing a paper jam is to first insure that the paper is not wrapped around the Transfer Charger wire. If it is, carefully pull the paper away from the wire area as shown below. Pull 1st 2 *ti Once the paper is clear of the wire, the paper can then be pulled to the right and out of the printer. Replace the processing tray and close the printer cover. Breakage of the Transfer Charger wire will cause a change in the print quality. The toner will not be completely transferred to the paper and the print will be light or inconsistent in darkness. If the Transfer Charger wire is broken, the Transfer Unit must be replaced. The part number is HGMBK-04601.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
PSB No: P-0074
Page: 2 of 2
Whenever a paper jam occurs you must remove the processing tray (which includes
the Developer Unit and the Drum Unit). Do not remove the jammed paper by pulling
the paper to the right (toward the paper supply tray) as this could break the Transfer
Charger wire.
The proper method of removing a paper jam is to first insure that the paper is not
wrapped around the Transfer Charger wire.
If it is, carefully pull the paper away from
the wire area as shown below.
Pull 1st
2
*ti
Once the paper is clear of the wire, the paper can then be pulled to the right and out
of the printer.
Replace the processing tray and close the printer cover.
Breakage of the Transfer Charger wire will cause a change in the print quality. The
toner will not be completely transferred to the paper and the print will be light or
inconsistent in darkness.
If the Transfer Charger wire is broken, the Transfer Unit must be replaced. The part
number is HGMBK-04601.