Epson ET-2550 User Manual - Page 3

4 Slide the edge guide against the paper, but not too tightly, and flip the feeder guard back. 5 Pull out the output tray and raise the paper stopper. Mobile printing options To print from a mobile device, your product must be set up for wireless printing or Wi-Fi Direct®. See the online User's Guide for instructions. iOS/Android™ epson.com/iprint Epson Connect™ Connect wirelessly from your tablet, smartphone, or computer. Print documents and photos from across the room or around the world. epson.com/connect 6 Select the paper settings on the product's control panel. 4 Install software Note: If your computer does not have a CD/DVD drive or you are using a Mac, an Internet connection is required to obtain the product software. 1 Make sure the product is NOT CONNECTED to your computer. Windows®: If you see a Found New Hardware screen, click Cancel and disconnect the USB cable. 2 Insert the product CD or download and run your product's software package: epson.com/support/et2550 (U.S.) or epson.ca/support/et2550 (Canada) 3 Follow the instructions on the screen to run the setup program. OS X: Make sure you install Software Updater to receive firmware and software updates for your product. 4 When you see the Select Your Connection screen, select one of the following: • Wireless connection In most cases, the software installer automatically attempts to set up your wireless connection. If setup is unsuccessful, you may need to enter your network name (SSID) and password. • Direct USB connection Make sure you have a USB cable (not included). 5 When software installation is complete, restart your computer. Any problems? Network setup was unsuccessful. • Make sure you select the right network name (SSID). The product can only connect to a network that supports 2.4 GHz. • If you see a firewall alert message, click Unblock or Allow to let setup continue. • If your network has security enabled, make sure you enter your network password (WEP key or WPA passphrase) correctly. Passwords must be entered in the correct case. There are lines or incorrect colors in my printouts. Run a nozzle check to see if any of the print head nozzles are clogged. Then clean the print head, if necessary. See the online User's Guide for more information. Setup is unable to find my product after connecting it with a USB cable. Make sure the product is on and securely connected as shown: Any questions? Quick Guide Basic information and troubleshooting. User's Guide Windows: Click the icon on your desktop or Apps screen to access the online User's Guide. OS X: Click the icon in Applications/Epson Software/Guide to access the online User's Guide. If you don't have a User's Guide icon, go to the Epson website, as described in the next column.