Epson ET-8550 Users Guide - Page 283
Product Makes Noise When It Sits for a While, Solving Paper Problems, Paper Feeding Problems
View all Epson ET-8550 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 283 highlights
Related concepts Print Head Maintenance Product Makes Noise When It Sits for a While Your product is performing routine maintenance. This is normal. Parent topic: Solving Copying Problems Solving Paper Problems Check these sections if you have problems using paper with your product. Paper Feeding Problems Paper Jam Problems in the Paper Cassettes Paper Jam Problems Inside the Product Paper Jam Problems in the Rear Cover Rear Paper Support Problems Paper Ejection Problems Parent topic: Solving Problems Paper Feeding Problems If you have problems feeding paper, try these solutions: • If paper does not feed for printing, remove it from the rear paper feeder or cassette. Reload it, then adjust the edge guides. Make sure the paper stack is not above the tab on the edge guides inside the cassette. Make sure to load only one sheet at a time in the rear paper feed slot. • Place the product on a flat surface and operate it in the recommended environmental conditions. • Be sure to insert the paper cassette all the way into your product. • If multiple pages feed at once, remove the paper, fan the edges to separate the sheets, and reload it. • Do not load more than the recommended number of sheets. • Make sure your paper meets the specifications for your product. • If paper jams when you print on both sides of the paper, try loading fewer sheets. • If paper is ejected from the rear paper feed slot without being printed, first start your print job, then load the sheet of paper. • Make sure the paper size and paper type settings are correct for the paper source. 283