Epson EX7240 Pro User Manual - Page 2

5 Use the arrow buttons on the remote control to highlight any of the options on the Home screen that appears, then press to select it. You can display a QR code, switch between projection sources, and quickly access various adjustment options from this screen. Using the remote control Make sure the batteries are installed as shown (two AA batteries). 6 The default language of the menu system is English. To select another language, press the Menu button on the projector or remote control. Select Extended and press . Select Language and press . Select your language and press . Press the Menu button to exit the menu system. Adjust the image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot release button and lift the front of the projector. Release the button to lock the foot in position. 3 EX7240 Pro: To reduce or enlarge the image, turn the zoom ring. E X3240: To reduce or enlarge the image, press the Tele (reduce) or Wide (enlarge) buttons on the projector. EX7240 Pro EX3240 4 Turn the focus ring to sharpen the image. EX7240 Pro Turn projector on and off Choose which source to display Access projector menus Navigate projector menus Turn off projector display Get solutions to common problems For more information on using the remote control, see the online User's Guide. Project wirelessly Follow the steps here to connect the projector over a wireless network. With the EX3240, you will need the optional wireless LAN module (part number V12H731P02). If you're projecting from a computer, it must have a wireless card or built-in wireless interface, and be running Windows 8, Windows 7, Windows Vista®, Windows XP Professional x64, or Windows XP, or OS X 10.5.8 to 10.10.x. Note: If you're using the optional Quick Wireless Connection USB key (Windows only, part number V12H005M09), press the LAN button on the remote control. When you see SSID and IP address information on the screen, connect the key to the projector's USB-A port. Look for the displayed message, remove the key, and connect it to a USB port on your computer. Follow the on-screen instructions on your computer to install the driver. For details, see the online User's Guide. 1 Press the Menu button on the remote control, select the Network menu, and press . EX3240 5 If your image looks like or , you may have placed the projector off to one side of the screen at an angle. Place the projector directly in front of the center of the screen, facing the screen squarely. If you can't move the projector, use the horizontal keystone slider on the projector to correct the image shape. EX7240 Pro EX3240 6 Your projector automatically adjusts images that look like or , but if necessary you can press the or button on the projector to correct it. 2 Choose Network Configuration and press . 3 Select the Wireless LAN menu and press .