Epson EX7240 Pro User Manual - Page 3

4 Choose Connection Mode, press , select Quick (for a direct connection to a computer, tablet, or smartphone) or Advanced (for a connection to a router or access point), then press again. When you're finished, press Esc to return to the Wireless LAN menu. 5 If you chose the Advanced connection mode, select Search Access Point and press . Use the arrow buttons to highlight your network name (SSID) in the list of available connections and press . 6 If your network has security enabled, enter your network password on the screen that appears. Make sure to enter any uppercase or lowercase letters in the correct case. Direct wireless connection Make sure your device and Epson projector are not connected to a network and your Epson projector's Connection Mode is set to Quick. 1 Tap iProjection on your device's Home screen. 2 Tap Projector to open the Search Projector menu. •• To select a number or character, use the arrow buttons on the remote control to highlight it, then press . •• To switch between uppercase and lowercase letters, select CAPS and press . •• To change the displayed symbols, select SYM1 or SYM2 and press . When you're finished entering the network password, select Finish and press . 7 If you chose the Advanced connection mode, select IP Settings and press . If your network assigns addresses automatically, make sure DHCP is turned on. If not, turn off DHCP and enter the projector's IP Address, Subnet Mask, and Gateway Address, as needed. 8 To prevent the SSID and IP address from appearing on the network standby screen, set the SSID Display and IP Address Display settings to Off. 9 When you're finished selecting settings in the Wireless LAN menu, press Esc. 10 Select Complete and press save your settings. , then select Yes and press again to 11 See "Install network software" for additional instructions. Install network software Install links to download the network software and manuals from the projector CD. Downloads require an Internet connection. You can also install the software and manuals from the Epson website, as described in "Where to get help." To project over the network, install the EasyMP® Network Projection software on each computer you will project from. To monitor and control your projector over the network, install the EasyMP Monitor software (Windows only). To project from multiple PCs over the network, install the EasyMP Multi PC Projection software. Click the icons on your desktop to download and install the software and their manuals. See the manuals for instructions on installing and using the software. Project wirelessly from a mobile device You can connect your mobile device and projector using Epson iProjection™ and a QR code. Make sure the wireless LAN module is installed in your projector and the latest version of Epson iProjection is installed on your device. Install the Epson iProjection app To project from an iOS or Android™ device, download and install the Epson iProjection app. Visit epson.com/projectorapp (U.S.) or epson.ca/projectorapp (Canada) for more information. 3 Tap Read QR code. 4 Point your device's camera at the QR code your projector displays; the QR code is read automatically. 5 Tap OK to register your projector's Wi-Fi profile. 6 Tap Install to install your projector's Wi-Fi profile. 7 Tap Install Now at the Unsigned Profile notification. 8 Tap Done to exit the Profile Installed screen. 9 Tap OK to confirm the connection to the projector. 10 Note the projector network name (SSID) shown on your device's screen. Then go to the Wi-Fi settings on your device to select that network. Your device and Epson projector are now connected. Network connection Make sure your projector and mobile device are connected to the same network. 1 Tap iProjection on your device's Home screen. 2 Tap Projector to open the Search Projector menu. 3 Tap Read QR code. 4 Point your device's camera at the QR code your projector displays; the QR code is read automatically. Your device and Epson projector are now connected. Troubleshooting If you see a blank screen or the No signal message after turning on your computer or video device, check the following: •• Make sure the Status light on the projector is blue and not flashing, and the A/V Mute slide is open. •• Press the Source Search button on the projector or the remote control to switch to the correct image source, if necessary. •• If you're using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear. •• If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox.