Epson EX7240 Pro User Manual - Page 39
Connecting to a Component-to-VGA Video Source, If you are using an adapter, connect these connectors
View all Epson EX7240 Pro manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
3. Connect the other end of the cable to the projector's HDMI /MHL port. Note: The projector converts the digital audio signal sent from your video source into a mono analog signal for the internal speaker. Parent topic: Connecting to Video Sources Connecting to a Component-to-VGA Video Source If your video source has component video ports, you can connect it to the projector using an optional component-to-VGA video cable. Depending on your component ports, you may need to use an adapter cable along with a component video cable. 1. Connect the component connectors to your video source's color-coded component video output ports, usually labeled Y, Pb, Pr or Y, Cb, Cr. If you are using an adapter, connect these connectors to your component video cable. 2. Connect the VGA connector to a Computer port on the projector. EX3240/EX5240/EX5250 Pro/EX7240 Pro/VS240/VS340/VS345 EX9200 Pro 3. Tighten the screws on the VGA connector. 39