Epson EX9200 Quick Setup
Epson EX9200 Manual
 |
View all Epson EX9200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Epson EX9200 manual content summary:
- Epson EX9200 | Quick Setup - Page 1
EX9200 Pro Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer USB cable HDMI cable VGA cable Audio cable - Epson EX9200 | Quick Setup - Page 2
image 1 If you don't see an image, press the Source Search button on the projector or the remote control to select the image source. Note: If you still see a blank screen or have other display problems, see the troubleshooting tips on the back of this sheet. 2 To raise the image, press the foot - Epson EX9200 | Quick Setup - Page 3
apply. Internet support Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. For more information on wireless projection, visit epson.com/wirelessprojectors - Epson EX9200 | Quick Setup - Page 4
-463-7766). Or you can purchase online at epsonstore.com (U.S. sales) or epson.ca (Canadian sales). Wireless notice Contains wireless LAN 802.11b/g/n module Model: WN7122BEP This document provides safety instructions and describes the specifications. Read this document carefully before use to ensure
-
1 -
2 -
3 -
4
 |
 |
Quick Setup
Before using the projector, make sure you read the safety instructions in the
online
User’s Guide
.
Connect the projector
Choose from the following connections. See the sections below or the online
User’s Guide
for details.
Computer
USB cable
HDMI cable
VGA cable
Audio cable
Computer port
Connect one end of a VGA cable to the projector’s
Computer
port, and the
other end to your laptop or computer’s
monitor port. Make sure to switch
your laptop to external display (see “Troubleshooting”). You can also connect
an audio cable.
HDMI port
Connect one end of an HDMI cable to the projector’s
HDMI1
or
HDMI2
ports
and the other end to an HDMI port on your computer.
USB port
Connect the square end of a USB cable to the projector’s
USB-B
(square) port.
Connect the flat end of the cable to any USB port on your computer.
Windows
®
XP or later:
After turning on the projector, follow the on-screen
instructions to install the Epson
®
USB Display software (
EMP_UDSE.EXE
; only
on first connection). If the software screen does not display automatically, open
My Computer
or
Computer
, then double-click
EPSON_PJ_UD
.
OS X 10.5.8 or higher:
After turning on the projector, the setup folder for
USB Display appears in the Finder. Double-click
USB Display Installer
and
follow the on-screen instructions to install the Epson USB Display software (only
on first connection).
Note:
If you have problems installing the USB Display software, make sure the
USB Type B
setting in the projector’s
Extended
menu is set to
USB Display
.
See the online
User’s Guide
for instructions.
Video device
Connect multiple video devices and use the
Source Search
button on the
projector or the remote control to switch between them.
RCA video cable (composite video)
Component video to VGA cable
HDMI cable
Audio cable
Mobile media device
Connect tablets, smartphones, and other devices that support the MHL™
standard to the
HDMI2
/
MHL
port.
MHL cable
Some devices may require an adapter or may not require an MHL cable. Not all
features or functions may be supported. Check your device’s documentation for
more information.
USB device
Connect a digital camera, USB flash drive, or USB storage device, to the
projector’s
USB-A
(flat) port.
USB cable
If you connect a digital camera, USB flash drive, or USB storage device, you can
use the projector’s PC Free feature. You can also connect other Epson document
cameras to the projector. See the online
User’s Guide
for details.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector. The
power light on the projector turns blue.
3
Open the
A/V Mute
slide all the way.
4
Press the
power button on the projector or remote control. The
projector beeps, the Status light flashes blue, and then stays on.
Note:
To shut down the projector, press the
power button twice, then
unplug it. You don’t have to wait for the projector to cool down.
EX9200 Pro