Epson EX9200 Quick Setup - Page 1

EX9200 Pro Quick Setup Before using the projector, make sure you read the safety instructions in the online User's Guide. Connect the projector Choose from the following connections. See the sections below or the online User's Guide for details. Computer USB cable HDMI cable VGA cable Audio cable Computer port Connect one end of a VGA cable to the projector's Computer port, and the other end to your laptop or computer's monitor port. Make sure to switch your laptop to external display (see "Troubleshooting"). You can also connect an audio cable. HDMI port Connect one end of an HDMI cable to the projector's HDMI1 or HDMI2 ports and the other end to an HDMI port on your computer. USB port Connect the square end of a USB cable to the projector's USB-B (square) port. Connect the flat end of the cable to any USB port on your computer. Windows® XP or later: After turning on the projector, follow the on-screen instructions to install the Epson® USB Display software (EMP_UDSE.EXE; only on first connection). If the software screen does not display automatically, open My Computer or Computer, then double-click EPSON_PJ_UD. OS X 10.5.8 or higher: After turning on the projector, the setup folder for USB Display appears in the Finder. Double-click USB Display Installer and follow the on-screen instructions to install the Epson USB Display software (only on first connection). Note: If you have problems installing the USB Display software, make sure the USB Type B setting in the projector's Extended menu is set to USB Display. See the online User's Guide for instructions. Video device Connect multiple video devices and use the Source Search button on the projector or the remote control to switch between them. Audio cable HDMI cable Mobile media device Connect tablets, smartphones, and other devices that support the MHL™ standard to the HDMI2/MHL port. MHL cable Some devices may require an adapter or may not require an MHL cable. Not all features or functions may be supported. Check your device's documentation for more information. USB device Connect a digital camera, USB flash drive, or USB storage device, to the projector's USB-A (flat) port. USB cable If you connect a digital camera, USB flash drive, or USB storage device, you can use the projector's PC Free feature. You can also connect other Epson document cameras to the projector. See the online User's Guide for details. Turn on your equipment 1 Turn on your computer or video source. 2 Plug in the projector. The power light on the projector turns blue. 3 Open the A/V Mute slide all the way. 4 Press the power button on the projector or remote control. The projector beeps, the Status light flashes blue, and then stays on. Component video to VGA cable RCA video cable (composite video) Note: To shut down the projector, press the power button twice, then unplug it. You don't have to wait for the projector to cool down.