Epson EX9200 Quick Setup - Page 3

5 To prevent the SSID and IP address from appearing on the network standby screen, set the SSID Display and IP Address Display settings to Off. 6 When you're finished selecting settings in the Wireless LAN menu, press Esc. 7 Select Complete and press save your settings. , then select Yes and press again to Install network software Install links to download the network software and manuals from the projector CD. Downloads require an Internet connection. You can also install the software and manuals from the Epson website, as described in "Where to get help." To project over the network, install the EasyMP® Network Projection software on each computer you will project from. To monitor and control your projector over the network, install the EasyMP Monitor software (Windows only). To project from multiple PCs over the network, install the EasyMP Multi PC Projection software. Click the icons on your desktop to download and install the software and their manuals. See the manuals for instructions on installing and using the software. Project wirelessly from a mobile device You can connect your mobile device and projector using Epson iProjection™ and a QR code. Make sure the latest version of Epson iProjection is installed on your device. Install the Epson iProjection app To project from an iOS or Android™ device, download and install the Epson iProjection app. Visit epson.com/projectorapp (U.S.) or epson.ca/projectorapp (Canada) for more information. Direct wireless connection Make sure your device and Epson projector are not connected to a network and your Epson projector's Connection Mode is set to Quick. 1 Tap iProjection on your device's Home screen. 2 Tap Projector to open the Search Projector menu. 3 Tap Read QR code. 4 Point your device's camera at the QR code your projector displays; the QR code is read automatically. 5 Tap OK to register your projector's Wi-Fi profile. 6 Tap Install to install your projector's Wi-Fi profile. 7 Tap Install Now at the Unsigned Profile notification. 8 Tap Done to exit the Profile Installed screen. 9 Tap OK to confirm the connection to the projector. 10 Note the projector network name (SSID) shown on your device's screen. Then go to the Wi-Fi settings on your device to select that network. Your device and Epson projector are now connected. Network connection Make sure your projector and mobile device are connected to the same network. 1 Tap iProjection on your device's Home screen. 2 Tap Projector to open the Search Projector menu. 3 Tap Read QR code. 4 Point your device's camera at the QR code your projector displays; the QR code is read automatically. Your device and Epson projector are now connected. Troubleshooting If you see a blank screen or the No signal message after turning on your computer or video device, check the following: •• Make sure the Status light on the projector is blue and not flashing, and the A/V Mute slide is open. •• Press the Source Search button on the projector or the remote control to switch to the correct image source, if necessary. •• Press the Home button on the projector or remote control to verify the source input and settings. •• If you're using a Windows laptop, press the function key on your keyboard that lets you display on an external monitor. It may be labeled CRT/LCD or have an icon such as . You may have to hold down the Fn key while pressing it (such as Fn + F7). Wait a moment for the display to appear. •• If you're using a Mac laptop, open System Preferences and select Displays. Click the Arrangement tab and select the Mirror Displays checkbox. Where to get help Manuals For more information about using the projector, click the icons on your desktop to access the online manuals (requires an Internet connection). If you don't see icons to the manuals, you can install them from the projector CD or go to the Epson website, as described below. Telephone support services To use the Epson® PrivateLine® Support service, call (800) 637-7661. This service is available for the duration of your warranty period. You may also speak with a support specialist by calling (562) 276-4394 (U.S.) or (905) 709-3839 (Canada). Support hours are 6 AM to 8 PM, Pacific Time, Monday through Friday, and 7 AM to 4 PM, Pacific Time, Saturday. Days and hours of support are subject to change without notice. Toll or long distance charges may apply. Internet support Visit epson.com/support (U.S.) or epson.ca/support (Canada) for solutions to common problems. You can download utilities and documentation, get FAQs and troubleshooting advice, or e-mail Epson. For more information on wireless projection, visit epson.com/wirelessprojectors. Registration Register today to get product updates and exclusive offers. You can use the CD included with your projector or register online at epson.com/webreg.