Epson Ensemble HD 6100 User's Guide - Page 13
Turning On the System, button to turn on the system. The screen comes
View all Epson Ensemble HD 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Turning On the System When you're ready to watch a movie, you can lower the screen, turn on the projector, and turn on the AV controller (with its built-in DVD player) with the touch of a button. 1 Make sure the MAIN menu is displayed on the remote control. If necessary, press the MAIN button. MAIN button MAIN DVD CABLE SAT HD RADIO 1 OF 2 ON button 2 Point the remote control at the screen and press the ON button to turn on the system. The screen comes down and the projector and AV controller turn on. Note Make sure the remote control remains pointed at the screen until the system has turned on. (You see the icon flash on the remote control screen while it's turning on the system.) If the system does not turn on, see "Basic Operation Problems" on page 61. The projector lamp takes up to 30 seconds to achieve full brightness. 3 When you're done using the system, make sure the MAIN menu is displayed on the remote control and press the OFF button. The projector and AV controller turn off, and the screen raises up automatically. Note If you install additional components, such as a cable box or satellite receiver, you can set up the remote control to turn them on with one button, too. See "Setting Up Macros" on page 77. 13