Epson Ensemble HD 6100 User's Guide - Page 36
Connecting Audio Equipment, Setting Up the Remote Control
View all Epson Ensemble HD 6100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Connecting Audio Equipment You can connect an external audio device, such as a CD player or tape deck, to the Ensemble HD system. Use an RCA-style stereo cable and connect your equipment's audio output port to the AUDIO 1 port on the back of the AV controller, as shown below: 2CH OUT port AUDIO 1 IN port To record from the AV controller to your tape deck, connect the audio input port on your tape deck to the 2CH OUT port, shown above. If you're not using a tape deck, you can use this port to connect the Ensemble HD system to an external amplifier or other home audio system. Note The 2CH OUT port is intended for use as a pass-through port. You cannot use the Ensemble HD system to control the volume of the audio signal transmitted through this port. Setting Up the Remote Control After connecting a new component, you can continue to use its original remote control. However, it may be more convenient to set up the Ensemble HD remote control to work with it. That way, you only need to use one remote control. You enable the Ensemble HD remote control to recognize the new component by entering a setup code as described on page 37. This creates the appropriate commands for your device in one of the remote control menus listed below: Component Cable box Satellite receiver High-definition DVD player Digital video recorder (for example, TiVo) Video game console Video cassette recorder Remote control menu name CABLE SAT HD DVR AUX VIDEO 36