Epson Equity 386/25 Product Support Bulletin(s) - Page 2
Epson
View all Epson Equity 386/25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
EPSON Product Support Bulletin Subject: Equity Series SIMM Compatibility Date: 12/4/91 Page(s): 1 of 1 PSB No: S-0136 Originator: JAD Due to the influx of third party SlMMs on the market, there are some that are not compatible with Epson products. This bulletin is intended to be an aid in ensuring that only compatible SlMMs are chosen for use in Epson's Equity Series of computers. The SlMMs in question were SEIMENS, CUMULUS and KINGSTON. Installing these SlMMs in Epson products may cause the following errors: Parity Check 1 18FFFE 0000 202 Memory Address Error 164 System Options Not Set 1500 E000 201" DOS RAM Address Error It was thought that the chips used in these SlMMs were of poor quality. Epson Portland evaluated the SlMMs in question and found that this was not true. The problem is caused by the SIMM circuit boards (ITE and TECAP circuit boards) used to manufacture the SIMM modules. The dimensions of these boards are not compatible with industry standard SIMM sockets. This may result in incomplete contact between the SIMM assembly and it's socket. This is caused by insufficient size of the contact surfaces in these products. Also enlarged holes in the TECAP product allow the component pin to pass entirely through the hole without making contact. It is recommended that only SIMMS meeting industry standard contact surface specifications be used in Epson Equity computer products. Some recommended SlMMs that were tested and found Compatible are: Toshiba Matsushita CDC Enterprises Samsung Aculogic For more information contact Technical Support.