Epson Expression 1600 Product Information Guide - Page 3

SCSI Interface, Option Interface Connector, Initialization methods - software

Page 3 highlights

EPSON Expression 1600 SCSI Interface Interface type ANSI X3T9.2/375R Revision 10L (SCSI 2) Functions BUS FREE phase ARBITRATION phase SELECTION/RESELECTION phase COMMAND phase (the Logical Unit Number is fixed at 0 and the Command Link Function is not supported) DATA phase DATA IN phase DATA OUT phase STATUS phase MESSAGE phase MESSAGE IN phase MESSAGE OUT phase ATTENTION condition RESET condition Logic level TTL compatible Electrical standard ANSI X3T9.2/375R Revision 10L (SCSI-2) ID Setting Selectable from 0 to 7 (factory setting: 2); asterisk (*) setting is only used when transporting scanner Terminator Internal terminator selectable (enable/ disable) Connector type Two Micro DB-50 connectors Connector pin arrangement 25 1 50 26 USB Interface Interface type Universal Serial Bus Specification Revision 1.0 Electrical standard Full speed mode (12MB) of Universal Serial Bus Specification Revision 1.0 Connector type One receptacle (Type B) Option Interface Connector Interface type Output voltage Output current For use with the optional automatic document feeder (B813162) or transparency unit (B813182) 21.6 to 26.4 VDC 4.75 to 5.25 VDC 0.6 A (24 V) 0.3 A (5 V) Initialization methods SCSI USB Scanner is turned on or receives a SCSI Reset signal from the SCSI interface (hardware initialization). Scanner receives a SCSI Bus Device message or an Esc @ command from the software (software initialization) Scanner is turned on or USB cable is unplugged from the USB port on the scanner (hardware initialization) Scanner receives a Bus Reset from the USB interface, or an Esc @ command from the software (software initialization) Optional Transparency Unit (B813182) The transparency unit allows you to scan positive and negative transparent materials-35 mm slides, 35 mm filmstrips, and film or documents up to 8.5 × 11.7 inches in size. In addition to four film guides, it comes with a reflective document mat that allows you to alternate between scanning transparent materials and normal reflective (paper) documents. General Dimensions Weight Maximum read area Reliability Width: 12.8 inches (324 mm) Depth: 21.3 inches (540 mm) Height: 3.6 inches (92 mm) 11 lb (5 kg) 8.5 × 11.7 inches (216 × 297 mm) MCBF 100,000 cycles 1/00 EPSON Expression 1600 - 4

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9

EPSON Expression 1600
1/00
EPSON Expression 1600
- 4
SCSI Interface
Interface type
ANSI
X3T9.2/375R Revision 10L
(SCSI 2)
Functions
BUS FREE phase
ARBITRATION phase
SELECTION/RESELECTION phase
COMMAND phase
(the Logical Unit Number is fixed at 0
and the Command Link Function
is not supported)
DATA phase
DATA IN phase
DATA OUT phase
STATUS phase
MESSAGE phase
MESSAGE IN phase
MESSAGE OUT phase
ATTENTION condition
RESET condition
Logic level
TTL compatible
Electrical standard
ANSI X3T9.2/375R Revision 10L
(SCSI-2)
ID Setting
Selectable from 0 to 7 (factory setting: 2);
asterisk (*) setting is only used when
transporting scanner
Terminator
Internal terminator selectable (enable/
disable)
Connector type
Two Micro DB-50 connectors
Connector pin arrangement
USB Interface
Interface type
Universal Serial Bus Specification
Revision 1.0
Electrical standard
Full speed mode (12MB) of Universal
Serial Bus Specification Revision 1.0
Connector type
One receptacle (Type B)
Option Interface Connector
Interface type
For use with the optional automatic
document feeder (B813162) or
transparency unit (B813182)
Output voltage
21.6 to 26.4 VDC
4.75 to 5.25 VDC
Output current
0.6 A (24 V)
0.3 A (5 V)
Initialization methods
SCSI
Scanner is turned on or receives a SCSI
Reset signal from the SCSI interface
(hardware initialization).
Scanner receives a SCSI Bus Device
message or an Esc @ command from the
software (software initialization)
USB
Scanner is turned on or USB cable is
unplugged from the USB port on the
scanner (hardware initialization)
Scanner receives a Bus Reset from the
USB interface, or an Esc @ command
from the software (software initialization)
Optional Transparency Unit (B813182)
The transparency unit allows you to scan positive and negative
transparent materials —35 mm slides, 35 mm filmstrips, and
film or documents up to 8.5
×
11.7 inches in size. In addition
to four film guides, it comes with a reflective document mat
that allows you to alternate between scanning transparent
materials and normal reflective (paper) documents.
General
Dimensions
Width: 12.8 inches (324 mm)
Depth: 21.3 inches (540 mm)
Height: 3.6 inches (92 mm)
Weight
11 lb (5 kg)
Maximum
read area
8.5
×
11.7 inches (216
×
297 mm)
Reliability
MCBF 100,000 cycles
25
50
1
26