Epson Expression 1680 Professional Product Information Guide - Page 4

EPSON Expression 1680 Lights and Buttons The scanner has two indicator lights and two buttons on its control panel. Light status and button functions are described in the tables that follow. Scanner indicator lights Light Light status Color Scanner status READY N Green Ready to scan images F (flashing) Green Scanning is in progress ERROR N Red F (rapidly flashing) O N = on, O = off, F = flashing An error occurred; see the following table for more information Error conditions ERROR READY light light Error type O O Command error: The scanner has received incorrect commands from your scanning software. Try rescanning the document. F O Interface error: Check that your scanner is securely connected to your computer, and then turn the scanner off and back on again. F F Fatal error: Check that the transportation lock is released, and then turn the scanner off and on again. If this doesn't solve the problem, call your EPSON dealer. O O Option error: There's a problem with an installed option. Check to make sure the transparency unit or automatic document feeder is flat against the document table. Check that your option is securely connected to the option (ADF/TPU) connector at the back of the scanner. Finally, check that the automatic document feeder isn't out of paper and doesn't have a paper jam. If these suggestions don't solve the problem, call your EPSON dealer. N = on, O = off, F = flashing Scanner buttons Button Function P Operate Turns the scanner on and off. a Start Automatically launches a a Start buttoncompatible application. You must set up your scanner software and a compatible application to use this button. If you installed Presto! PageManager, it's automatically assigned to the a Start button. You can set up Presto! PageManager to scan your image automatically and send it directly to another application or a peripheral device, such as a printer. Transporting the Scanner When you transport the scanner a long distance or store it for an extended time, follow the steps below to secure the carriage. 1. Make sure the transportation lock on the back of the scanner is in the UNLOCK position. home position 2. Locate the SCSI ID rotary switch on the back of the scanner. Align the dot on the rotary switch with the asterisk (*). 3. If you're using a transparency unit or automatic document feeder, remove it and replace the scanner cover. 4. Turn on the scanner and wait until the carriage moves to the home position as shown. Then turn off the scanner. 5. Slide the transportation lock at the back of the scanner to the LOCK position. locked position If the carriage does not automatically return to the home position, slowly raise the front of the scanner and hold it up until the carriage comes to rest in the home position. Then slide the transportation lock to the LOCK position. 4 - EPSON Expression 1680 1/01