Epson Expression 636 Product Information Guide - Page 1

Epson Expression 636 Manual

Page 1 highlights

document cover document table optional interface connector SCSI ID transportation termination rotary ground lock lever switch switch terminal AC SCSI parallel inlet interface interface connectors connector Scanner Specifications Scanner type: Flatbed, color Photoelectric device: Color CCD (Charged Coupled Device) line sensor Effective pixels: 5096 dots by 7020 dots at 600 dpi, 100% Maximum document size: 8.5 inches x 11.7 inches (216 mm x 297 mm) to allow US letter size or A4 (The reading area can be specified from software.) Scanning resolution: 600 dpi (main, sub) Output resolution: 50 to 4800 dpi. Values above 2400 through software interpolation. Command level: ESC /I-B6 (B5+AAS) EPSON Expression 636 Scanning speed (A4,600 dpi, draft mode): Line art: approx. 5.5 ms/line 256 gray levels: approx. 5.5 ms/line Full color: approx. 8 ms/line (line/byte sequence) Color separation: RGB color filters on CCD Reading sequence: Monochrome mode: One-pass scanning Color page sequence mode: Three-pass scanning (R, G, B) Color byte sequence One-pass scanning (R, G, B) Color line sequence mode: One-pass scanning (R, G, B) Zoom: 50 to 200% in 1% steps (hardware); software selectable up to 2000%, depending on output device Image data: 12 bits per pixel per color (input). When over 8 bits are captured, they are saved as 8 bits per pixel per color (maximum output) Brightness: 7 levels Line art settings: Fixed threshold with TET (Text Enhancement Technology) enabled 0 to 255 adjustable threshold with TET disabled Halftoning process: Enable/disable selectable 3 halftoning modes (A, B, and C) and 4 dither patterns (A, B, C, and D) for bi-level and quad-level data Halftoning mode A only in color line sequence mode 2 user-defined dither patterns Gamma correction: 2 types for CRT display 3 types for printer 1 type for user-defined Color correction: 1 type for CRT display 3 types for printer output (available in color line sequence mode only) 1 type for user-defined Interface: Bidirectional parallel and SCSI Light source: Xe-gas cold cathode fluorescent lamp Reliability: Main unit MCBF: 100,000 cycles of carriage movements Dimensions: Width: 13 inches (332 mm) Depth: 22.2 inches (563 mm) Height: 5.2 inches (133 mm) Weight: About 22 lb (10 kg) Scanners 9130196 EPSON Expression 636-l

  • 1
  • 2
  • 3
  • 4
  • 5

EPSON Expression 636
document cover
document table
Scanning speed
Line art:
approx. 5.5 ms/line
(A4,600 dpi, draft
256 gray levels: approx. 5.5 ms/line
mode):
Full color:
approx. 8 ms/line
(line/byte sequence)
Color separation:
RGB color filters on CCD
Reading sequence: Monochrome mode:
One-pass scanning
Color page sequence mode:
Three-pass scanning (R, G, B)
Color byte sequence
One-pass scanning (R, G, B)
Zoom:
Image data:
optional
SCSI ID
interface
transportation termination rotary ground
connector
lock lever
switch
switch terminal
AC
inlet
SCSI
interface
connectors
parallel
interface
connector
Scanner Specifications
Scanner type:
Photoelectric
device:
Effective pixels:
Maximum
document size:
Scanning
resolution:
Output resolution:
Command level:
Scanners
Flatbed, color
Color CCD (Charged Coupled Device)
line sensor
5096 dots by 7020 dots at 600 dpi, 100%
8.5 inches x 11.7 inches
(216 mm x 297 mm) to allow US letter
size or A4 (The reading area can be
specified from software.)
600 dpi (main, sub)
50 to 4800 dpi. Values above 2400
through software interpolation.
ESC /I-B6 (B5+AAS)
Brightness:
Line art settings:
Color line sequence mode:
One-pass scanning (R, G, B)
50 to 200% in 1% steps (hardware);
software selectable up to 2000%,
depending on output device
12 bits per pixel per color (input).
When over 8 bits are captured, they are
saved as 8 bits per pixel per color
(maximum output)
7 levels
Fixed threshold with TET (Text
Enhancement Technology) enabled
0 to 255 adjustable threshold with TET
disabled
9130196
EPSON Expression 636-l
Halftoning process: Enable/disable selectable
3 halftoning modes (A, B, and C) and
4 dither patterns (A, B, C, and D) for
bi-level and quad-level data
Halftoning mode A only in color line
sequence mode
2 user-defined dither patterns
Gamma correction: 2 types for CRT display
3 types for printer
1 type for user-defined
Color correction:
1 type for CRT display
3 types for printer output (available in
color line sequence mode only)
1 type for user-defined
Interface:
Bidirectional parallel and SCSI
Light source:
Xe-gas cold cathode fluorescent lamp
Reliability:
Main unit MCBF: 100,000 cycles of
carriage movements
Dimensions:
Width:
13 inches (332 mm)
Depth:
22.2 inches (563 mm)
Height: 5.2 inches (133 mm)
Weight:
About 22 lb (10 kg)