Epson FX 1170 Product Information Guide - Page 1

pnper guide printer cover c?d@ &k?S release her FX-870/1170 Paper-feed speed: Friction: 69 ms/line at l/6-inch line spacing Tractor: 77 ms/line at l/6-inch line spacing Continuous feed: 3.7 inches per second Buffer: 24 KB or 0 KB (Selectable in the default setting mode) Printable columns: ~~ paper-tension unit \ ribbon cartridge shief Note: The power cord is attached. .& inlet Printer Specifications Printing Printing method: Printing speed: 9-pin impact dot matrix Type of letters High-speed draft Draft pica Draft elite Condensed draft pica Emphasized draft pica NLQ normal pica Print speed [cps] 380 (320) 285 [142] 342 [170] 243 [122] 1142 [71) I57 [142] Notes: 1) The printing speed for high speed draft is reduced to the value in "( )" with thick paper (over 0.18 mm). 2) The printing speed for high speed draft is reduced to the value of "draft pica" when any graphic character is in the line. 3) The printing speed for draft is reduced to the value in "[ ]" when any italic character is in the line. 4) The speed for high duty printing is reduced to approximately half of each speed, except for the printing speed in "[ ]". Printing direction: Bidirectional logicseeking for text Unidirectional for graphics Line spacing: l/6-inch, l/%inch, or programmable in increments of 1/216-&h Characterfonts: Draft, Epson Roman, or Epson Sans Serif in normal or condensed mode. You can also select other font/pitch combinations using E!X/P commands. Character tables (ESCIF Mode): Europe: One italic and 15 graphic character tables &rth/South * One italic and 7 graphic character tables olkr- One italic and 5 graphic character tables 13 international character sets Character tables (IBM Emulation): 2 Character tables 1 Symbol sets Paper Single sheets (top insertion): Width 148 to 257 mm (5.8 to 10.1 inches) for standard 148 to 420 mm (5.8 to 16.5 inches) for wide L=wh Thickness max. 364 mm (14.3 inches) 0.065 to 0.14 mm (0.0025 to 0.0055 inches) Weight 52.3 to 90 g/m2 (14 to 24 lb) Single-sheet multi-partfimts: Q bad single sheet multi-part forms only into the front slot with the optional front sheet guide. 0 Use carbonless multi-part forms only. Continuous paper: Width 101 to 254 mm (4 to 10 inches) for standard 101 to 406 mm (4 to 16 inches) for wide Copies Four sheets (one original plus up to three copies) Thickness 0.065 to 0.32 mm (0.0025 to 0.012 inch) for one sheet 0.12 to 0.32 mm (0.0047 to 0.012 inch) total Weight 52.3 to 82 g/m2 (14 to 22 lb) for one sheet 40 to 58.2 g/m2 (12 to 15 lb) per sheet in multi-part forms 0 Use carbonless multi-part forms only. 9-Pin Printers 10/13/92 FX-870/1170-1