Epson FX 1170 Product Information Guide - Page 3

FX-870/1170 Mechanical Paper-feed methods: Friction (with or without optional cut-sheet feeder) Push tractor (front or rear) Pull tractor Push-pull tractor (optional) Ribbon: Fabric ribbon cartridge Standard: #8750 Wide: #8755 Life expectancy at 14 dots/character: 3 million characters MTBF: Standard: 4000 power-on hours Wide: 6000 power-on hours Print head life: 100 million characters/wire Dimensions and weight: ~! Safety Approvals Safety standards: UL1950 with D3 CSA22.2 No. 220 R.F.I. FCC part 15 subpart B class B Interface Specifications Your printer is equipped with an g-bit parallel interface. Specifications and pin assignments The built-in parallel interface has the following characteristics: Datafmmat: 8-bit parallel Synchronization: STROBE pulse Handshake timing: BUSY and ACKNLG signals Signal level: T-FL-compatible Cotmectm: 36-pin 57-30360 Amphenol connector or equivalent Electrical 120 V model: Rated voltage: AC 120 V Input voltage range: AC 103.5 to 132 V Rated current: 1.8 A Power consumption: (during self-test printing in draft mode at 10 cpi) Standard: approx. 45 W Wide: approx. 45 W Rated frequency range: 50to60Hz Input frequency range: 49.5 to 60.5 Hz Dielectric strength (between AC line and chassis): AC 1OOOV rms 1 minute or AC 12OOV rms 1 second Environmental Temperature: Operation: 5" to 35°C (41" to 95°F) Storage: -30" to 60°C (-22" to 140°F) Humidity (without condensation): Operation: 10% to 80% RH Storage: 5% to 85% RH Interface Cards You can use optional interface cards to supplement your printer's built-in parallel interface. The Epson interfaces below are compatible with your printer. ~ Option Specifications Cut-sheet feeders Dimensions and weight: Dimensions include the printer. 9-Pin Printers 10/13/92 FX-870/1170-3